HP StorageWorks 4/16 Brocade OS Command Reference Manual Supporting Fabric OS - Page 461

portCfgAlpa 2 portCfgAlpa Configure the AL_PA offset on a specified port. Synopsis portcfgalpa [slotnumber/]portnumber, mode Description Use this command to set the Arbitrated Loop Physical Address (AL_PA) offset on a port to either 0x0 or 0x13. Changes made by this command are persistent across switch reboots and power cycles. Operands When invoked without operands, this command displays the usage. The following operands are supported: slotnumber For bladed systems only, specify the slot number of the port to be configured, followed by a slash (/). portnumber Specify the number of the port to be configured, relative to its slot for bladed systems. Use the switchShow command for a list of valid ports. mode Specify a value of 1 to set the AL_PA to 0x13. A value of 0 sets the default AL_PA of 0x0. This operand is required. Examples To configure a port with AL_PA 0x0 (default): switch:admin> portcfgalpa 1/3 0 See Also To configure a port with AL_PA 0x13: switch:admin> portcfgalpa 1/3 1 portCfgShow Fabric OS Command Reference 435 53-1000599-01