HP StorageWorks 4/16 Brocade OS Command Reference Manual Supporting Fabric OS - Page 56
aliAdd, QuickLoop AL_PAs
View all HP StorageWorks 4/16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
2 aliAdd aliAdd Adds a member to a zone alias. Synopsis aliadd "aliName", "member[;member...]" Description Use this command to add one or more members to an existing zone alias. The alias member list cannot contain another zone alias. This command changes the defined configuration. For the change to be preserved across switch reboots, it must be saved to nonvolatile memory using the cfgSave command. For the change to become effective, an appropriate zone configuration must be enabled using the cfgEnable command. Notes This command requires a Brocade Advanced Zoning license. When FCS policy is enabled, this command can be issued only from the primary FCS switch. Operands The following operands are required: "aliName" Specify the name of a zone alias, in quotation marks. This operand is required. "member" Specify a member or list of members to be added to the alias, in quotation marks, separated by semicolons. This operand is required. An alias member can be specified by one or more of the following methods: • A switch domain and port area number pair. For ports using the switchShow command, view the area numbers. • WWN • QuickLoop AL_PAs Examples To add members to zone aliases array1, array2, and loop1: switch:admin> aliadd "array1", "1,2" switch:admin> aliadd "array2", "21:00:00:20:37:0c:72:51" switch:admin> aliadd "loop1", "4,5[0x02]; 6,7[0xEF]" See Also aliDelete, aliRemove, aliShow 30 Fabric OS Command Reference 53-1000599-01