HP StorageWorks 4/16 Brocade OS Command Reference Manual Supporting Fabric OS - Page 46

2 ag 20 Disables the specified port policy for the Access Gateway. When a policy is disabled, all port related configuration settings will be lost. Use the configUpload command to save the current port configuration. --mapshow [N_Port] Displays the F_Ports that are mapped to a given "primary" N_Port and are currently routed through the specified N_Port This listing may not be the same as the set of F_Ports configured for N_Port failover. Optionally specify an N_Port to display the F_Ports that are mapped to this specified N_Port only. Failover and failback policies are displayed as enabled (1) or disabled (0). --mapset N_Port [F_Port1; F_Port2;...] Maps a set of F_Ports to a specified "primary" N_Port forcing all traffic from the F_Ports to be routed through this N_Port to the attached fabric. An F_Port cannot be mapped to more than one primary N_Port at any given time. F_Ports will be enabled only if the N_Port is online. This command overwrites existing port mappings. Use a blank list ("") to clear current mappings. --mapadd N_Port F_Port1 [; F_Port2;...] Adds one or more specified F_Ports to the mapping of an existing "primary" N_Port. The traffic for the configured F_Ports will be routed to the fabric through the specified N_Port when the F_Ports come online. An F_Port cannot be mapped to more than one primary N_Port at the same time. --mapdel N_Port F_Port1 [; F_Port2;...] Deletes one or more specified F_Ports from the "primary" N_Port mapping. --pgshow [Port Group ID] Displays Port Group configuration. The port grouping feature supports specifying a set of N_Ports to be included in the Port Group (PG) Policy. The factory default PG is "pg0", which includes all N_Ports. It can not be removed or renamed. --pgcreate- pgid 'N_Port1 [; N_Port2;...]" [-n pgname] Creates a port group with the ID pgid and a specified list of N_Ports to be included in the policy. The list must be enclosed in quotation marks. Ports must be separated by semicolon. Maximum numbers of ports allowed in a port group is MAX_PORT. Port Group ID must not exceed 64 characters. --pgadd pgid 'N_Port1 [; N_Port2;...]" Adds one or more N_Ports to the specified port group. The port list must be enclosed in quotation marks. Ports must be separated by semicolon. --pgdel pgid 'N_Port1 [; N_Port2;...]" Deletes one or more N_Ports from the specified port group. Deleted ports are added to the default port group "pg0". The port list must be enclosed in quotation marks. Ports must be separated by semicolon. --pgrename pgid newname Replaces the name of an existing port group with the specified new name. Port Group ID must not exceed 64 characters. Fabric OS Command Reference 53-1000599-01