HP StorageWorks 4/16 Brocade OS Command Reference Manual Supporting Fabric OS - Page 458

2 portCfg -e 1|0 -i value -p value -r value -s value -t value -z value Enables or disables FTRACE. 1 is enabled, O is disabled. The default value is 0. Displays mask value. The range is 00000000 toFFFFFFFF. The default is FFFFFFFF. Specifies post trigger percentage value. The range is 0 to 100 Default is 5. Specifies the number of records. The range is 0 to 1,677,721. The default is 200000. Specifies trigger mask value. The range is 00000000 to FFFFFFFF. The default is 00000003. Specifies trace mask value. The range is 00000000 to FFFFFFFF. The default is 80000C7B. Specifies trace record size. The range is 80 to 240. The default is 80. Examples To add an ARP entry: switch:admin> portcfg arp ge0 add 192.168.255.25 00:01:02:03:04:60 Operation Succeeded To create an FCIP tunnel using IPV4: switch:admin> portcfg fciptunnel ge0 create 2 192.168.255.2 192.168.255.20 100000 Operation Succeeded To create an FCIP tunnel using IPV6: switch:admin> portcfg fciptunnel 8/ge0 create 0 4000::1234 2000::800:3333:1234 0 Operation Succeeded To modify an FCIP tunnel: switch:admin> portcfg fciptunnel 3/ge0 modify 6 -b 100000 -c 1 Operation Succeeded To create an FCIP tunnel with VC QoS mapping (default) turned on: switch:admin> portcfg fciptunnel ge1 create 1 192.168.200.109 192.168.200.108 0 -M To modify the default VC QoS map settings for VC 1: switch:admin> portcfg fciptunnel ge1 qosmap 1 3 -Q 29 switch:admin> portcfg fciptunnel ge1 qosmap 1 4 -Q 28 -P 7 switch:admin> portcfg fciptunnel ge1 qosmap 1 4 -P 2 To return the VC QoS map settings to default values: switch:admin> portcfg fciptunnel ge1 qosmap 1 -default To create an FCIP tunnel with VLAN tagging: switch:admin> portcfg fciptunnel8/ge0 create 1 192.168.10.1 192.168.20.1 0 -m 20 -v 100 -p 3 -P 7 Operation Succeeded 432 Fabric OS Command Reference 53-1000599-01