HP StorageWorks 4/16 Brocade OS Command Reference Manual Supporting Fabric OS - Page 421

perfDelFilterMonitor 2 perfDelFilterMonitor Deletes one or all filter-based performance monitors from a port. Synopsis perfdelfiltermonitor [slotnumber/]portnumber [monitorid] Description Use this command to delete a filter-based performance monitor from a port, or all such monitors associated with a port. Notes This command requires a Brocade Advanced Performance Monitoring license. This command is not supported on virtual FC ports (VE/VEX_Port), EX_Port, M (Mirror) ports and GbE ports. The execution of this command is subject to Admin Domain restrictions that may be in place. Operands This command has the following operands: slotnumber For bladed systems only, this operand specifies the slot number of the port on which the monitor is to be deleted, followed by a slash (/). portnumber Specifies the number of the port on which the monitor is to be deleted, relative to its slot for bladed systems. Use switchShow for a list of valid ports. monitorid Specify the monitor number to delete. Monitor numbers are defined when created and can be displayed using perfShowEEMonitor. This operand is optional. If not specified, all monitor counters on the port are deleted. Optionally, a comma can separate the operands. A space is required to separate the operands even when using commas. Examples To delete filter monitor 4 from a port, and then all filter monitors from the port: switch:admin> perfdelfiltermonitor 2/3 4 The specified filter-based monitor is deleted. switch:admin> perfdelfiltermonitor 2/3 This will remove ALL monitors on port 19, continue? (yes, y, no, n): [no] y See Also perfAddUserMonitor, perfMonitorShow Fabric OS Command Reference 395 53-1000599-01