HP StorageWorks 4/16 Brocade OS Command Reference Manual Supporting Fabric OS - Page 249

firmwareKeyUpdate 2 keyfile passwd Specify a fully-qualified path for the firmware keyfile. Absolute path names may be specified using forward slashes (/). When updating from a USB device, the keyfile must reside in the firmwarekey directory on the USB device. Specify a password. This operand can be omitted, if firmware is accessible through a local directory or an attached USB device, or if no password is required by the FTP server. This operand is required when accessing an SSH server. Examples To update the public key from a server, using an automatically determined transfer protocol: switch:admin> firmwarekeyupdate 192.168.21.34,johndoe,/pub/dist/pubkey.pem,12345 Updating the public key, please wait... Public key successfully updated. To update the public key using the interactive method: switch:admin> firmwarekeyupdate Server Name or IP Address: 192.168.21.34 User Name: johndoe File Name: /pub/dist/pubkey.pem Network Protocol(1-auto-select, 2-FTP, 3-SCP) [1]: Password: Updating the public key, please wait... Public key successfully updated. To update the public key from an external USB device: switch:admin>Firmwarekeyupdate -U /usb/usbstorage/brocade/firmwarekey/pubkey.pem Updating the public key, please wait... Public key successfully updated. See also firmwareDownload, firmwareKeyShow, configure Fabric OS Command Reference 223 53-1000599-01