HP StorageWorks 4/16 Brocade OS Command Reference Manual Supporting Fabric OS - Page 45

ag 2 ag Enables and manages the Access Gateway (AG) mode to perform AG specific operations. Synopsis ag action [arguments...] Availability Show options - all users. Set options - admin Description Use this command to enable and disable Access Gateway mode, to display the current configuration, to display and configure current AG modes, policies, F_Ports to N_Port mappings, to create and manage port group configurations including adding and deleting N_Ports to a specified port group. AG configuration changes are saved persistently as config keys. Use portCfgnPort command to set a port as N_Port. Notes AG is supported only on selected Brocade hardware platforms. Refer to the Fabric OS Administrator's Guide for Hardware support and AG configuration procedures. Operands The command takes as input an action and its associated arguments. Without any specified action, the command prints out the usage. --help Displays command usage. --show Displays the current configuration of the Access Gateway. This includes all N_Ports and F_Ports that are currently online, failover and failback settings as well as any online F_Ports that are currently mapped to N_Ports. Failover and failback policies are displayed as enabled (1) or disabled (0). --modeshow Displays the current Access Gateway operating mode of the switch as either enabled or disabled. --modeenable Enables Access Gateway mode for a switch. Note: Long distance mode settings should be cleared for all ports on the NPIV edge switch to which the AG is connected. Otherwise, the NPIV switch port will display the long distance port type along with the F_port. --modedisable Disables Access Gateway mode for a switch. Note: After AG mode is disabled, the switch will come online with default zone access set to "No Access". In order to merge the switch to a fabric you must set the default zone to "All Access" and disable/enable the E_Port". --policyshow Displays the supported AG Port policies and their status as either enabled or disabled. AG supports two types of policies: Port Grouping (pg) and Auto Port Configuration (auto). The Port Grouping policy manages failover of an F_Port to a set of related N_Ports in a port group. Auto Port Configuration is disabled by default. When this policy is enabled, the AG enabled switch will automatically detect available ports and map F_ports to N_ports. --policyenable policy name Enables the specified port policy for the Access Gateway. When a new policy is enabled, all port related configuration settings will be lost. Use the configUpload command to save the current port configuration. --policydisable policy name Fabric OS Command Reference 19 53-1000599-01