HP Visualize J5000 hp Visualize J5000, J7000 workstations service handbook (a4 - Page 102
Memory Retention Bracket, Removing Memory DIMMs
View all HP Visualize J5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
2. Remove the memory retention bracket, if equipped, shown in Figure 5-13 by removing the two attachment screws. Memory Bracket Figure 5-13. Memory Retention Bracket 3. To remove a memory DIMM, open the ejector handles on both sides of the DIMM. Lift the memory DIMM up and out of the connector. Place the memory DIMM on a static-free surface. Figure 5-14 shows how to remove the memory DIMM. Figure 5-14. Removing Memory DIMMs 4. Go to the following section, "Memory DIMM Installation," to install the re- placement DIMM. 5-20 Field Replaceable Units
5–20
Field Replaceable Units
2.
Remove the memory retention bracket, if equipped, shown in Figure 5–13 by
removing the two attachment screws.
Memory Bracket
Figure 5–13.
Memory Retention Bracket
3.
To remove a memory DIMM, open the ejector handles on both sides of the
DIMM. Lift the memory DIMM up and out of the connector. Place the memory
DIMM on a static-free surface. Figure 5–14 shows how to remove the memory
DIMM.
Figure 5–14.
Removing Memory DIMMs
4.
Go to the following section, “Memory DIMM Installation,” to
install the re-
placement DIMM.