HP Visualize J5000 hp Visualize J5000, J7000 workstations service handbook (a4 - Page 131
EMI Plate with no Fan Attached
View all HP Visualize J5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
4. Set the drawer on a flat surface. NOTICE: The EMI plate may have a fan attached to it. If it does go to step 7. EMI Plate with no Fan Attached 5. Unscrew the captive screw holding the EMI plate at the back of the removable drives and lift the plate up and out of the drawer, as shown in Figure 5-44. Figure 5-44. Removing EMI Plate 6. Disconnect the SCSI and power cables from the drive. 7. Go to step 13. Field Replaceable Units 5-49
Field Replaceable Units
5–49
4.
Set the drawer on a flat surface.
NOTICE:
The EMI plate may have a fan attached to it. If it
does go to step 7.
EMI Plate with no Fan Attached
5.
Unscrew the captive screw holding the EMI plate at the back of the removable
drives and lift the plate up and out of the drawer, as shown in Figure 5–44.
Figure 5–44.
Removing EMI Plate
6.
Disconnect the SCSI and power cables from the drive.
7.
Go to step 13.