HP Visualize J5000 hp Visualize J5000, J7000 workstations service handbook (a4 - Page 23
The Clean/Attention Light flashes
View all HP Visualize J5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
3. Repeat the operation you performed when the Media Wear (Caution) signal displayed. If the Media Wear (Caution) signal still displays, then the data cassette should be replaced. 4. If you are performing a backup from disk to tape, discard the data cassette and back up your files using a new data cassette. 5. If you are performing a restore from tape to disk, complete the restore, then discard the data cassette and back up the files to a new data cassette. LEDs - DDS-2 The front panel has two colored LEDs: the Tape Light and the Clean/Attention Light. The Tape Light flashes green to show activity (loading, unloading, reading, and writing). Steady green means a cartridge is loaded. The Clean/Attention Light flashes amber to indicate head cleaning is needed or a cartridge is near the end of its life. Steady amber means a hard fault. Table 1-3 lists the LED codes and their meanings. Table 1-3. LED Display Codes - DDS-2 Drive Tape Light Clean/ Meaning Attention Activity - load or unload Activity - read or write Cartridge loaded Any Cleaning needed Any Fault Key OFF Steady Green Steady Amber Flashing Green 1/2 sec on, 1/2 sec off Flashing Amber 1/2 sec on, 1/2 sec off Fast Flash Green 1/4 sec on, 1/4 sec off Product Information 1-9