HP Visualize J5000 hp Visualize J5000, J7000 workstations service handbook (a4 - Page 30
SCSI Connectors, Power Cord Connector
View all HP Visualize J5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Table 1-6. Serial I/O Pins Pin No. 1 2 3 4 5 6 7 8 9 Signal DCD RXD TXD DTR GND DSR RTS CTS RI Description Data Carrier Detect Receive Data Transmit Data Data Terminal Ready Ground Data Set Ready Request To Send Clear To Send Ring Indicator SCSI Connectors Use the SCSI connectors to connect external SCSI devices such as DDS-format tape drives and CD-ROM drives. Consult the documentation that accompanies each SCSI device for specific information concerning its use. Refer to Appendix C for information about connecting SCSI devices to your workstation. NOTICE: There must ALWAYS be a terminator at both ends of a SCSI bus. This means one internal terminator and one external terminator. Power Cord Connector Plug the workstation's power cord into the power cord connector to provide ac power to the system. 1-16 Product Information