HP Visualize J5000 hp Visualize J5000, J7000 workstations service handbook (a4 - Page 18
System Power Switch, System Power LED, Storage Device Controls and Features
View all HP Visualize J5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
System Power Switch Use the Power switch to power the system unit on and off. CAUTION: Do not turn off the power to the workstation without first performing the recommended shutdown procedure. Not shutting down the workstation properly, can damage the programs and data on the disk. Using the proper shutdown method for the workstation and operating system ensures that remote users receive shutdown notices, messages can be broadcast, or shutdown can be delayed for a specified number of minutes. If this workstation is running HP-UX 9.05, the recommended method of shutting down is using the software command /etc/shutdown. If this workstation is running HP-UX 10.0 or later, follow the instructions in Using Your HP Workstation to shut it down. System Power LED The Power Light Emitting Diode (LED) is located on the left side of the front panel. It lights when the system unit power is on and flashes until the OS is booted. Once the OS is booted, the LED remains on without flashing, indicating that a soft shutdown is enabled. Storage Device Controls and Features This workstation allows up to two of the following internal storage devices: CD-ROM drive, DDS tape drive, or floppy drive. The following sections describe the controls and features of these devices. 1-4 Product Information