HP Visualize J5000 hp Visualize J5000, J7000 workstations service handbook (a4 - Page 163
Updating System Firmware with ODE
View all HP Visualize J5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
D listautofl or lsautofl - lists the contents of the (HP-UX) autoboot file. D support - boots the Support Tape from the boot device. D readss - displays 4 bytes (one word) from Stable Storage. The readss command requires a decimal number between 0 and 255 to address four bytes in Stable Storage. Updating System Firmware with ODE The Offline Diagnostic Environment (ODE) consists of diagnostic modules for testing and verifying system operation. The update utility of ODE provides the capability of updating the PDC/IODC firmware from the LIF directory onto the EEPROM. ode is an ISL utility. To invoke ODE and bring up the update utility: 1. Invoke the ISL environment from the system disk. 2. Type ode Enter after the ISL> prompt to invoke ode from the LIF direc- tory on the system disk. The prompt changes to ODE>. 3. At the ODE> prompt, type update Enter to bring up the update utility. The prompt changes to UPDATE>. NOTICE: The update command is available only if the workstation is running HP-UX version 10.0. The following commands may be entered at the UPDATE> prompt: D help - prints a one line description of each of the available commands in the update utility. D info - prints information on how to use the update utility. D run - updates the PDC of the workstation from the LIF directory. D image - allows you to specify which LIF images to use. D stable - allows stable storage to be updated when you issue the RUN command. D expert - enables/disables exit pausing and run confirmation for expert users. D exit - resets the workstation so the new PDC can run. To run the update utility, type run Enter at the UPDATE> prompt. After update loads the new images into memory, it asks you if you want to continue the update process, and displays the PDC version of the currently running PDC as well as that of the images that were loaded. If you wish to continue, type y Enter . When the update process has completed, the machine reboots automatically. Boot Console 9-15