IBM 8676 Hardware Maintenance Manual - Page 106
Error, code/symptom, FRU/action, Configuration/Setup, Utility, program., System, board, Failing,
UPC - 087944770107
View all IBM 8676 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Note: See "System" on page 112 to determine which components should be replaced by a field service technician. Error code/symptom FRU/action 062 (Three consecutive startup failures using the default configuration.) 1. Run the Configuration/Setup Utility program. 2. Battery. 3. System board. 4. Microprocessor. 101, 102 (System and processor error) v System board 106 (System and processor error) v System board 111 (Channel check error) 1. Failing adapter 2. DIMM 3. System board 114 (Adapter read-only memory error) 1. Failing adapter. 2. Run diagnostics. 129 (Internal cache error) 1. Microprocessor 2. Optional microprocessor (if installed) 3. System board 151 (Real time clock error) 1. Run diagnostics. 2. Battery. 3. System board. 161 (Real time clock battery error) 1. Run the Configuration/Setup Utility program. 2. Battery. 3. System board. 162 (Device configuration error) Note: Be sure to load the default settings and any additional desired settings; then, save the configuration. 1. Run the Configuration/Setup Utility program. 2. Battery. 3. Failing device. 4. System board. 163 (Real-time clock error) 1. Run the Configuration/Setup Utility program. 2. Battery. 3. System board. 164 (Memory configuration changed.) 1. Run the Configuration/Setup Utility program. 2. DIMM. 3. System board. 165 (Service Processor failure) v System board 175 (Hardware error) v System board 176 (Computer cover or cable cover was removed without a key being used) 1. Run the Configuration/Setup Utility program. 2. System board. 177, 178 (Security hardware error) 1. Run the Configuration/Setup Utility program. 2. System board. 96 xSeries 335 Type 8676, Type 8830: Hardware Maintenance Manual and Troubleshooting Guide