IBM 8676 Hardware Maintenance Manual - Page 98
Read/Write
UPC - 087944770107
View all IBM 8676 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Note: See "System" on page 112 to determine which components should be replaced by a field service technician. Error code/symptom FRU/action 206-XXX-000 (Failed diskette drive test) 1. Rerun the test using another diskette. 2. Cable. 3. Diskette drive. 4. System board. 215-XXX-000 (Failed IDE CD-ROM drive test) 1. Rerun the test using another CD-ROM. 2. CD-ROM drive cables. 3. CD-ROM drive. 4. System board. 217-198-XXX (Could not establish drive parameters) 1. Check cable and termination. 2. SCSI backplane. 3. Hard disk drive. 217-XXX-000 (Failed hard disk drive test) Note: If RAID is configured, the hard disk drive number refers to the RAID logical array. v Hard disk drive 1 217-XXX-001 (Failed hard disk test) Note: If RAID is configured, the hard disk number refers to the RAID logical array. v Hard disk drive 2 264-XXX-0NN (Failed tape drive test) 1. Tape cartridge, if user executed the Read/Write Tape Drive test (failure code of xxx = 256) 2. SCSI or power cable connected to tape drive with SCSI ID nn 3. Tape drive with SCSI ID nn (refer to the Help and Service Information appendix of the tape drive's User Guide) 4. System board or SCSI controller (run SCSI controller diagnostic to determine if the SCSI bus is functioning properly.) 264-XXX-999 (Errors on multiple tape drives, see error text for more info) v See error messages/text in the PC Doctor error log for detailed information on each individual tape drive error. 301-XXX-000 (Failed keyboard test) v Keyboard v System board. 405-XXX-000 (Failed Ethernet test on controller on the system board) 1. Verify that Ethernet is not disabled in BIOS. 2. System board. 405-XXX-00n 1. Adapter in PCI slot n (Failed Ethernet test on adapter in PCI slot n) 2. System board 405-XXX-a0n 1. For a = 0, system board (Failed Ethernet test on adapter in PCI slot a) 2. For a > 0, adapter in PCI slot a 415-XXX-000 (Failed Modem test) 1. Cable Note: Ensure modem is present and attached to server. 2. Modem 3. System board 88 xSeries 335 Type 8676, Type 8830: Hardware Maintenance Manual and Troubleshooting Guide