IBM 8676 Hardware Maintenance Manual - Page 70
Cabling, chain
UPC - 087944770107
View all IBM 8676 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
The following sections describe how to cable a C2T chain and an ASM interconnect network. Cabling a C2T chain Use C2T interconnect cables to connect the servers into a chain. The following illustration shows a C2T interconnect cable. Use a C2T breakout cable (available in the C2T cable option kit) to connect the first server in the chain to the monitor, keyboard, and pointing device. The following illustration shows a C2T breakout cable. Before cabling the C2T chain, review the following information: v You can connect a maximum of 42 servers in a C2T chain. v When connecting servers that are more than 3 U apart or on different racks, you must use a 2-m (6.5-ft) C2T interconnect cable, which comes in the C2T cable option kit. You can use only one 2-m (6.5-ft) cable in a chain. v C2T interconnect cables are hot-swappable. v Servers are numbered by their positions in the chain (1 through n). If one server is removed from the chain, the remaining servers are renumbered. For example, if the 12th server is removed from a chain of 15 servers, servers 13 through 15 are renumbered to 12 through 14. v C2T numbering is independent of other server references. For example, changing the position of a server in the C2T chain does not affect its IP address. v C2T chaining supports a maximum video mode of 1024 x 768. Complete the following steps to cable a C2T chain: 1. Turn off the servers. 2. Obtain a sufficient number of C2T interconnect cables. The server comes with one C2T interconnect cable that can span approximately 3 U. A 2-m (6.5-ft) C2T interconnect cable and a C2T breakout cable come in the C2T cable option kit. The following illustration shows a C2T chain of four servers. 60 xSeries 335 Type 8676, Type 8830: Hardware Maintenance Manual and Troubleshooting Guide