IBM 8676 Hardware Maintenance Manual - Page 110
positioned
UPC - 087944770107
View all IBM 8676 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
Note: See "System" on page 112 to determine which components should be replaced by a field service technician. Error code/symptom FRU/action 8603 (Pointing-device error) 1. Pointing device 2. System board 0001200 (Machine check architecture error) 1. Microprocessor 1 2. Optional microprocessor 2 3. System board 00012000 (Microprocessor machine check) 1. Microprocessor 2. System board 00019501 (Microprocessor 1 is not functioning check VRM and microprocessor LEDs) 1. Microprocessor 1 2. System board 00019502 (Microprocessor 2 is not functioning - check VRM and microprocessor LEDs) 1. Microprocessor 2 2. System board 00019701 (Microprocessor 1 failed) 1. Microprocessor 1 2. System board 00019702 (Microprocessor 2 failed) 1. Microprocessor 2 2. System board 00180100 (A PCI adapter has requested memory resources that are not available.) 1. Reorder the adapters in the PCI slots. It is important that your startup device is positioned early in the startup-device order so that it is run by POST. 2. Ensure that the PCI adapter and all other adapters are set correctly in the Configuration/Setup Utility program Utility program. If the memory resource settings are not correct, change the settings. 3. If all memory resources are being used, you might need to remove an adapter to make memory available to the PCI adapter. Disabling the adapter BIOS on the adapter might correct the error. (See the documentation provided with the adapter.) 00180200 (No more I/O space available for PCI adapter) 1. Run the Configuration/Setup Utility program. 2. Failing adapter. 3. System board. 00180300 (No more memory (above 1MB for PCI adapter)) 1. Run the Configuration/Setup Utility program. 2. Failing adapter. 3. System board. 00180400 (No more memory (below 1MB for PCI adapter)) 1. Run the Configuration/Setup Utility program. 2. Move the failing adapter to slot 1 or 2. 3. Failing adapter. 4. System board. 00180500 (PCI option ROM checksum error) 1. Remove failing PCI adapter. 2. System board. 00180600 (PCI adapter self-test) 1. Run the Configuration/Setup Utility program. 2. Move the failing adapter to slot 1 or 2. 3. Failing adapter. 4. System board 100 xSeries 335 Type 8676, Type 8830: Hardware Maintenance Manual and Troubleshooting Guide