IBM 8676 Hardware Maintenance Manual - Page 67
Replacing, battery
UPC - 087944770107
View all IBM 8676 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Note: The fan LEDs are lit by the Light Path Diagnostics circuitry. For more information about the LEDs and Light Path Diagnostics, see "Light Path Diagnostics" on page 26 and "Light Path Diagnostic panel system error LED" on page 82. 5. Remove the fan from the server: a. Disconnect the fan cable from the system board, noting how the cable is routed. b. Lift the fan out of the server. Airflow 6. Position the replacement fan so that the airflow arrow on the side of the fan is facing or pointing toward the rear of the server. Note: Correct airflow is from the front to the rear of the server. 7. Position the replacement fan in the location from which you removed the failed fan. 8. Connect the replacement fan cable to the system board, making sure that the cable is routed the same way as in step 5a. 9. Continue with "Completing the installation" on page 59. Replacing the battery When replacing the battery you must replace it with a lithium battery of the same type, from the same manufacturer. To avoid possible danger read and follow the safety statement below. To order replacement batteries, call 1-800-772-2227 within the United States, and 1-800-465-7999 or 1-800-465-6666 within Canada. Outside the U.S. and Canada, call your IBM reseller or IBM marketing representative. Note: After you replace the battery, you must reconfigure your server and reset the system date and time. Statement 2: Chapter 4. Customer replaceable units 57