IBM 8676 Hardware Maintenance Manual - Page 95
code/symptom
UPC - 087944770107
View all IBM 8676 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Note: See "System" on page 112 to determine which components should be replaced by a field service technician. Error code/symptom FRU/action 014-XXX-000 (Failed parallel port test) v System board 015-XXX-001 1. System board (USB interface not found, board damaged) 015-XXX-015 (Failed USB external loopback test) 1. Make sure the parallel port is not disabled. 2. Run the USB external loopback test again. 3. System board. 015-XXX-198 (USB device connected during USB test) 1. Remove USB devices from USB1 and USB2. 2. Run the USB external loopback test again. 3. System board. 020-XXX-000 (Failed PCI interface test) v System board 020-XXX-001 (Failed hot-swap slot 1 PCI latch test) 1. PCI hot-swap latch assembly 2. System board 020-XXX-002 (Failed Hot-swap slot 2 PCI latch test) 1. PCI hot-swap latch assembly 2. System board 020-XXX-003 (Failed hot-swap slot 3 PCI latch test) 1. PCI hot-swap latch assembly 2. System board 020-XXX-004 (Failed hot-swap slot 4 PCI latch test) 1. PCI hot-swap latch assembly 2. System board 030-XXX-000 (Failed internal SCSI interface test) v System board 035-XXX-099 1. No adapters were found. 2. If adapter is installed re-check connection. 035-XXX-s99 1. RAID adapter (Failed RAID test on PCI slot s. s = number of failing PCI slot. Check System Error Log 2. SCSI backplane before replacing a FRU.) 3. Cable 035-XXX-snn (Check System Error Log before replacing a FRU. s = number of failing PCI slot, nn = SCSI ID of failing fixed disk.) v Hard disk drive with SCSI ID nn on RAID adapter in PCI slot s. 035-253-s99 (RAID adapter initialization failure) 1. ServeRAID adapter in slot s is not configured properly. Obtain the basic and extended configuration status and see the ServeRAID Hardware Maintenance Manual for more information. 2. Cable. 3. SCSI backplane. 4. Adapter. 075-XXX-000 (Failed power supply test) v Power supply 089-XXX-001 (Failed microprocessor test) 1. Microprocessor 1 2. System board 089-XXX-002 (Failed optional microprocessor test) 1. Optional microprocessor 2 2. System board Chapter 6. Symptom-to-FRU index 85