IBM 8676 Hardware Maintenance Manual - Page 84
guidelines
UPC - 087944770107
View all IBM 8676 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
SCSI backplane Complete the following steps to remove the SCSI backplane. Note: v Read "Installation guidelines" on page 37. v Read the safety notices at "Safety information" on page 119. v Read "Handling electrostatic discharge-sensitive devices" on page 122. 1. Turn off the server. 2. Disconnect all power cords and external cables from the back of the server. 3. Remove the server from the rack. 4. Pull out the hard drives. 5. Remove the server cover (see "Removing the cover and bezel" on page 44). 6. Disconnect th cables from the SCSI backplane. Note: The illustrations in this publication might differ slightly from your hardware. Retention notches Retention tabs 7. Gently pull up on the backplane until it is released from the server at the notches; then, pull the backplane out of the server. To replace the SCSI backplane, reverse the previous steps, making sure to align the tabs and notches. 74 xSeries 335 Type 8676, Type 8830: Hardware Maintenance Manual and Troubleshooting Guide