IBM 8676 Hardware Maintenance Manual - Page 97
installed.
UPC - 087944770107
View all IBM 8676 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Note: See "System" on page 112 to determine which components should be replaced by a field service technician. Error code/symptom FRU/action 166-201-005 System Management: Failed 1. DIMMs (I2C bus error(s) See SERVPROC and DIAGS entries in event log.) 2. Microprocessors 3. System board 166-250-000 System Management: Failed 1. Reseat I2C cable between the Advanced System Management (I2C cable is disconnected. Reconnect I2C Adapter (in PCI slot 1/J1) and the system board (J2). cable between Remote Supervisor Adapter and system board.) 2. I2C cables. 3. Advanced System Management adapter. 4. System board. 166-260-000 System Management: Failed 1. Disconnect all server and option power cords from the server, (Restart ASM Error. After restarting, ASM wait 30 seconds, reconnect, and retry. communication was lost. Unplug and cold boot to reset ASM.) 2. Reseat the Remote Supervisor Adapter (in PCI slots 1/J1). 3. Remote Supervisor Adapter. 166-342-000 System Management: Failed 1. Ensure the latest firmware levels for Remote Supervisor (ASM adapter BIST indicate failed tests.) Adapter and BIOS are installed. 2. Disconnect all server and option power cords from server, wait 30 seconds, reconnect, and retry. 3. Remote Supervisor Adapter. 166-400-000 System Management: Failed 1. Reflash or update firmware for ISMP. (ISMP self test result failed tests: x where x = Flash, RAM, or ROM.) 2. System board. 180-XXX-000 (Diagnostics LED failure) v Run diagnostics panel LED test for the failing LED. 180-XXX-001 (Failed front LED panel test) 1. Operator information card 2. System board 180-XXX-002 (Failed diagnostics LED panel test) v System board 180-XXX-003 (Failed system board LED test) v System board 180-XXX-005 (Failed SCSI backplane LED test) 1. SCSI backplane 2. SCSI backplane cable 3. System board 180-361-003 (Failed fan LED test) 1. Fan 2. System board 201-XXX-0nn (Failed memory test.) 1. DIMM Location slots 1-4 where nn = DIMM location. Note: nn 1=DIMM 1; 2=DIMM 2; 3=DIMM 3; 4=DIMM 4. 2. System board. 201-XXX-999 (Multiple DIMM failure, see error text) 1. See error text for failing DIMMs. 2. System board. 202-XXX-001 (Failed system cache test) 1. Microprocessor 1 2. System board 202-XXX-002 (Failed system cache test) 1. Microprocessor 2 2. System board Chapter 6. Symptom-to-FRU index 87