Home » Intel Manuals » Processors » Intel 521 » Manual Viewer

Intel 521 Data Sheet - Page 91

Electrical Requirements

UPC - 683728199029

Add to My Manuals
Save this manual to your list of manuals

Page 91 highlights

Boxed Processor Specifications Figure 7-4. Space Requirements for the Boxed Processor (Overall View) 7.1.2 7.1.3 7.2 7.2.1 Boxed Processor Fan Heatsink Weight The boxed processor fan heatsink will not weigh more than 450 grams. See Chapter 5 and the Intel® Pentium® 4 Processor on 90 nm Process in the 775-Land Package Thermal Design Guidelines for details on the processor weight and heatsink requirements. Boxed Processor Retention Mechanism and Heatsink Attach Clip Assembly The boxed processor thermal solution requires a heatsink attach clip assembly, to secure the processor and fan heatsink in the baseboard socket. The boxed processor will ship with the heatsink attach clip assembly. Electrical Requirements Fan Heatsink Power Supply The boxed processor's fan heatsink requires a +12 V power supply. A fan power cable will be shipped with the boxed processor to draw power from a power header on the baseboard. The power cable connector and pinout are shown in Figure 7-5. Baseboards must provide a matched power header to support the boxed processor. Table 7-1 contains specifications for the input and output signals at the fan heatsink connector. Datasheet 91

Section	Page
Contents	3
Revision History	7
Intel® Pentium® 4 Processors 570/571, 560/561, 550/551, 540/541, 530/531, and 520/521	9
1 Introduction	11
1.1 Terminology	12
1.1.1 Processor Packaging Terminology	12
1.2 References	13
2 Electrical Specifications	15
2.1 FSB and GTLREF	15
2.2 Power and Ground Lands	15
2.3 Decoupling Guidelines	15
2.3.1 VCC Decoupling	16
2.3.2 FSB GTL+ Decoupling	16
2.3.3 FSB Clock (BCLK[1:0]) and Processor Clocking	16
2.4 Voltage Identification	17
2.4.1 Phase Lock Loop (PLL) Power and Filter	19
2.5 Reserved, Unused, FC and TESTHI Signals	20
2.6 FSB Signal Groups	21
2.7 GTL+ Asynchronous Signals	22
2.8 Test Access Port (TAP) Connection	23
2.9 FSB Frequency Select Signals (BSEL[2:0])	23
2.10 Absolute Maximum and Minimum Ratings	24
2.11 Processor DC Specifications	24
2.12 VCC Overshoot Specification	33
2.12.1 Die Voltage Validation	33
2.13 GTL+ FSB Specifications	34
3 Package Mechanical Specifications	35
3.1 Package Mechanical Drawing	35
3.2 Processor Component Keep-Out Zones	39
3.3 Package Loading Specifications	39
3.4 Package Handling Guidelines	39
3.5 Package Insertion Specifications	40
3.6 Processor Mass Specification	40
3.7 Processor Materials	40
3.8 Processor Markings	40
3.9 Processor Land Coordinates	41
4 Land Listing and Signal Descriptions	43
4.1 Processor Land Assignments	43
4.2 Alphabetical Signals Reference	66
5 Thermal Specifications and Design Considerations	75
5.1 Processor Thermal Specifications	75
5.1.1 Thermal Specifications	75
5.1.2 Thermal Metrology	79
5.2 Processor Thermal Features	79
5.2.1 Thermal Monitor	79
5.2.2 Thermal Monitor 2	80
5.2.3 On-Demand Mode	81
5.2.4 PROCHOT# Signal	82
5.2.5 THERMTRIP# Signal	82
5.2.6 TCONTROL and Fan Speed Reduction	82
5.2.7 Thermal Diode	83
6 Features	85
6.1 Power-On Configuration Options	85
6.2 Clock Control and Low Power States	85
6.2.1 Normal State	86
6.2.2 HALT and Enhanced HALT Powerdown States	86
6.2.2.1 HALT Powerdown State	86
6.2.2.2 Enhanced HALT Powerdown State	86
6.2.3 Stop-Grant State	87
6.2.4 Enhanced HALT Snoop or HALT Snoop State, Grant Snoop State	88
6.2.4.1 HALT Snoop State, Grant Snoop State	88
6.2.4.2 Enhanced HALT Snoop State	88
7 Boxed Processor Specifications	89
7.1 Mechanical Specifications	90
7.1.1 Boxed Processor Cooling Solution Dimensions	90
7.1.2 Boxed Processor Fan Heatsink Weight	91
7.1.3 Boxed Processor Retention Mechanism and Heatsink Attach Clip Assembly	91
7.2 Electrical Requirements	91
7.2.1 Fan Heatsink Power Supply	91
7.3 Thermal Specifications	93
7.3.1 Boxed Processor Cooling Requirements	93