JVC GY-HM700UXT 132 page operation manual for the GY-HM700 solid state camcord
JVC GY-HM700UXT - Prohd Compact Shoulder Solid State Camcorder Manual
View all JVC GY-HM700UXT manuals
Add to My Manuals
Save this manual to your list of manuals |
JVC GY-HM700UXT manual content summary:
- JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 1
HD MEMORY CARD CAMERA RECORDER GY-HM700U INSTRUCTIONS GY-HM700CHU GY-HM700E GY-HM700CHE * The illustration shows the GY-HM700E with the supplied viewfinder, microphone and lens attached. * GY-HM700CHU/GY-HM700CHE does not come with a lens. For Customer Use: Enter below the Serial No. which - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 2
service personnel under the following conditions: a. When the power cord or plug is damaged or frayed. b. If liquid has been spilled into the appliance. c. If the appliance has been exposed to rain or water. d. If the appliance does not operate normally by following the operating instructions - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 3
and maintenance (servicing) instructions in the with the instruction manual, may BY JVC COULD VOID USER'S AUTHORITY TO OPERATE THE EQUIPMENT. NOTE: The rating plate A UN AGENT QUALIFIE EN CAS DE PROBLEME. Le symbole de l'éclair àl'int à la norme NMB-003 du Canada. WARNING: TO REDUCE THE RISK OF - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 4
following lengths: Port [DC INPUT] [Y/VIDEO], [PB], [PR] [AUDIO INPUT 1/2] [AUDIO OUTPUT] [PHONES] [IEEE1394] (HD/DV) [HD/SD-SDI] [REMOTE] [LENS] [ Vertretung für die Victor Company of Japan, Limited ist: JVC Technical Services Europe GmbH Postfach 10 05 04 61145 Friedberg Deutschland Attention: - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 5
V - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 6
Display (Camera Mode Only 18 Menu Setting Screen 18 Alarm Display 18 Zebra Pattern Display 18 Preparations Attaching Accessories 19 Attaching 49 Setting Zebra Pattern 50 Setting Spot Meter 51 Viewing Recorded Videos Immediately (Clip Review) . . . .52 Assigning Functions to User Buttons 53 - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 7
[Favorites Menu 91 Status Screen Status Screen in Camera Mode 94 Status Screen in SD Card Mode 100 123 Troubleshooting 124 Specifications 126 How to use this manual Ⅵ Symbols Content of this manual ● All rights reserved by JVC. Unauthorized duplication or reprinting of this manual, in whole - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 8
Windows or Macintosh computers and for checking the video images. (MP4 file format) The CD-ROM provided with this camera recorder comes with [JVC ProHD Clip Manager] and other application software as well as the user guides. * For details, refer to the user guides for each application software. 4 - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 9
salt and sand may adhere to the camera body. Be sure to clean the camera after use. Ⅵ Protect this device against used on this device. GY-HM700CHU/GY-HM700U : Dionic90 (Anton Bauer) GY-HM700CHE/GY-HM700E : Endura-7 (IDX is not a malfunction. Ⅵ When the video signal output terminals are not in use, - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 10
Ⅵ Noise may appear in the viewfinder when switching between the live video and playback images. Ⅵ Due to the characteristic of the viewfinder display this device does not increase. Copyright Any recordings made on this camera recorder that are played back for profit or public preview may infringe - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 11
Review function. (A Page 52) Media SD Card Mode Mode IEEE1394 Mode Purple Green Orange When [Rec Mode] is set to AVariable FrameB, the operation mode indicator lights up in purple during Variable Frame REC in Camera mode for video images from the IEEE1394-connected equipment. The camera recorder - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 12
(A Page 45) G [DISPLAY] Display Button (A Page 29) H [CAM/MEDIA] Camera/Media Mode Selection Button (A Page 7) I [FULL AUTO] Full Auto Shooting (FAS) Pad) (A Page 26) K Shoe For mounting separately sold lights and accessories. L Microphone Holder Lock Knob (A Page 19) M Microphone Holder (A Page - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 13
Page 44) V Viewfinder Connector (20-pin) (A Page 20) W Accessory Mounting Screw Hole (x2) X [FOCUS ASSIST] Focus Assist Button (A Page trigger button (A Page 10) K at the side control panel on the right of the camera recorder is not locked. Z [REC] REC Trigger Button (Recording Start/Stop) Starts/ - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 14
according to the object. The functions change as below according to the operation mode (A Page 7). [USER1] Button [USER2] Button [USER3] Button During Camera Mode ● Activates the function assigned to [USER1] in the menu. ● Loads the [TC Preset] screen when pressed together with the [MENU] button - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 15
Memo: ● When [Camera Function]B[Switch Set]B[AE LEVEL] is set to AAE LEVEL/VFRB, the cross-shaped button (H I) is used to set the number of frames during Variable Frame REC. (A Page 56 [Variable Frame REC]) (A Page 75 [AE LEVEL]) Ⅵ During Media mode (SD Card mode) (A Page 57) Thumbnail operation : - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 16
H [HD/DV] IEEE1394 Terminal Mode Switch (A Page 115) I [INT/EXT] IEEE1394 Interface Terminal Switch (A Page 115) For selecting a valid IEEE1394 interface terminal. [EXT] [INT] : Enables IEEE1394 signals from the [IEEE1394] terminal M. : Enables the accessory connector B at the rear of the camera - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 17
, the camera recorder may fall and cause injuries. ● Check the instruction manual provided with the shoulder belt before using. B Accessory Connector (Connects to an optional accessory) C Battery Mounting Folder (A Page 21) The shape is different for GY-HM700CHU/GY-HM700U and GY-HM700CHE/GY-HM700E - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 18
Lens (Supplied with GY-HM700U/GY-HM700E only) CANON Review] of [Switch Set] in the [Camera Function] menu. (A Page 74) (A Page 52 [Viewing Recorded Videos Immediately (Clip Review)]) Memo: ● When [LENS RET] of [Switch Set] in the [Camera iris operation mode. M : Manual iris operation mode. I Iris - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 19
XLR 3P Focus Manual Unit HZ-FM13 (FUJINON) HZ-FM15 (CANON) 1/3 Zoom Lens Th13x3.5BRMU(FUJINON) Shoulder Belt Earphone Microphone SDI Cable BNC Component Cable BNC Composite Cable BNC Audio Cable RCA pin IEEE1394 Cable Monitor Monitor External Recording Device For GY-HM700CHU/GY-HM700U VTR PL - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 20
camera status, media information, zebra pattern, and various markers in the video image on the LCD monitor and viewfinder screens during shooting. Besides camera USER 1 BARS USER 2 B.STRETCH3 USER 3 LOAD FILE RET CLIP REVIEW SKIN/SPOT SPOT METER AELEVEL AE LEVEL/VFR STBY 282min Jan 2. - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 21
Monitor You can enlarge and display only the characters of the status screen on the LCD monitor. (Camera mode only) CH1 CH2 DF FREE A STBY 1280 x 720 min 24p HQ B 100 min 282min status on the LCD monitor screen, the video image remains displayed on the viewfinder. 282min STATUS 1 Screen 17 - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 22
66 [Basic Operations in Menu Screen]) Zebra Pattern Display Two types of zebra patterns that indicate the luminance level of the video image can be displayed on this camera recorder. You can set the luminance levels for displaying the two types of zebra patterns. (A Page 50 [Setting Zebra Pattern - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 23
Preparations Attaching Accessories Attaching the Zoom Lens (Supplied with GY-HM700U/GY-HM700E only) Hole 13 Pin REC 2 When attaching or removing the zoom lens, set the [POWER] switch of the camera recorder to AOFFB. Attaching the Microphone (Supplied) You can attach the supplied microphone to - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 24
Preparations Attaching Accessories (continued) Attaching the Viewfinder (Supplied) 1 Slide the viewfinder in the direction of the arrow to attach it. 2 Turn the slide lock ring to secure the position of the viewfinder. Slide Lock Ring 2 Power Supply To use this camera recorder, you can attach a - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 25
recommended batteries. Heavy batteries may fall off if not used correctly. ● See the battery instruction manual on how to charge the battery. [DC INPUT] DC Cable DC OUTPUT AC Adapter 2 Set the [POWER] switch of the camera recorder to AONB after turning on the AC adapter. Power will be supplied to - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 26
and insert straight. Guide Hole (x3) Release Lever Guide Pins Attaching the Battery (GY-HM700CHE/GYHM700E) Use the Endura-7 (IDX) battery. 1 Attach the battery. Face the terminal downward and attach the V mount of the battery onto the V mount attachment bracket of the camera recorder. V Mount - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 27
battery in use is not a recommended one, the battery mark which indicates the battery level may not appear. Ⅵ Status screen (A Page 94 [Status Screen in Camera Mode]) (A Page 100 [Status Screen in SD Card Mode]) (A Page 102 [Status Screen in IEEE1394 Input Mode]) 1280x720 30/24 fps 24p HQ 00:00 - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 28
SDHC card is not possible in Camera mode. However, you can use the Clip Review function to check the most recently recorded video clip. (A Page 52) Ⅵ . IEEE1394 input signals cannot be recorded. Turning Off the Power Set the camera recorder to the recording standby or stop mode. 1 Set the [POWER - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 29
Date/Time]. The [Date/Time] setting screen appears. [POWER] Switch 1 Set the [POWER] switch to AONB. The [Initial Setting] screen appears. Ⅵ For GY-HM700CHU/GY-HM700U 2 Set the date and time. A Move the cursor with the cross-shaped button (H I) and select the setting item. B Change the values with - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 30
● To perform the settings while looking at the monitor screen connected to the video signal output terminal, set [Analog Out Char.] or [SDI Out Char.] in level adjustment knob at the side control panel on the right of the camera recorder. Various warning alarm tones may also be output repeatedly. (A - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 31
wide angle end. ● Place an object 3 m and above away from the camera. ● The Siemens Star Chart is most suitable as the object. 3 4, 6 5 1 Set the iris mode switch of the lens to AMB (manual). 2 Set the zoom mode switch to AMANU.B (manual). 3 Turn to open the iris ring. Adjust the lighting such that - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 32
PEAKING] Knob [VF BRIGHT] Knob Eyepiece Focus Ring Eyepiece Slide Lock Ring Eyepiece Lock Ring Note: ● A high-definition viewfinder is used on this camera recorder in order to provide an accurate focusing environment. Due to the characteristic of the display device, colors may appear on the images - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 33
displays by pressing the [DISPLAY] button can be canceled by opening/closing or rotating the LCD monitor. ● When the LCD monitor is stored in the camera recorder in the direction of normal display, pressing of the [DISPLAY] button will not work. ● You can display both the LCD monitor and viewfinder - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 34
and warning. The operation changes according to the menu settings. When the battery or remaining space on the SDHC card is low, the lamps blink. (Camera mode only) * Set using [Tally System]/[Front Tally]/[Back Tally] in the [Main Menu]B[Others] menu. (A Page 87) Front Tally Lamp Back Tally Lamp - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 35
Card Cover Knob Slot B Status Indicator Slot A Status Indicator [SLOT SELECT] Button SDHC Card Cover Inserting an SDHC Card This camera recorder comes with two card slots for video/ audio recording and playback (Slot A and B). 1 Slide the SDHC card cover knob of the desired slot in the direction - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 36
screen. ● If you remove the SDHC card during formatting, AFormat Error!B appears and the camera recorder returns to the previous screen. ● During formatting, menu operation is unavailable but you the SDHC card, all data recorded on the card, including video data and setup files, will be deleted. 32 - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 37
Cards The estimated recordable time is only a guide. Differences may occur depending on the SDHC card in use and the battery condition. (A Page 71 [Camera Resolution]) (A Page 71 [Frame & Bit Rate]) QuickTime/MP4 Camera Resolution Bit Rate 1280x720 HQ 1440x1080 1920x1080 1440x1080 SP 1280x720 - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 38
Switch [REC] Button Preparations 1 Attach the accessories. (A Page 19) 2 Supply battery or AC adapter power to the camera recorder. (A Page 21) 3 Insert an the most recently captured images (Clip Review) Press the [RET] button on the lens to activate the Clip Review function (A Page 52). The most - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 39
the file size. However, they can be played back continuously on the camera recorder. Clips may be recorded across both SDHC cards in card slot A When copying clips to a HDD using a PC, it is recommended to use [JVC Clip Manager Software], which is found in the bundled CD-ROM, to maintain continuity - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 40
60i(SP) HDV compatible 50i(HQ) 50i(SP) HDV compatible 1920x1080 60i(HQ) Full HD 30p(HQ) Full HD 50i(HQ) Full HD 25p(HQ) Full HD 24p(HQ) Full HD File Format MP4 Record Format Camera Resolution Horizontal×Line 1280x720 Frame & Bit Rate 60p(HQ) 60p(SP) 30p(HQ) 30p(SP) 24p(HQ) 24p(SP - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 41
use the menu to set the tracking sensitivity of the auto iris. (A Page 73) Fixed Gain Mode (Manual Gain Switching) You can select the gain of the video amplifier using the [GAIN] switch on the camera recorder. The default positions of the switch are as follows. [L] : 0 dB (No electrical boosting - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 42
frame) using the electronic shutter function. Electronic shutter can be adjusted manually or automatically. Fixed Shutter Mode (Manual to the video format and variable frame rate settings. Ⅵ During modes other than Variable Frame REC Shutter Camera Resolution/ Frame & Bit Rate 720/60p 720 - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 43
Camera Resolution/ Shutter Frame & Bit Rate 720/25p Frame Rate 50, 25, 12.5 40, 20, 10 J Button 1/10000 1/10000 1/4000 1/4000 1/2000 1/2000 1/1000 1/1000 1/500 Step 1/500 1/250 1/250 1/120 1/120 1/50 (Standard) 1/50 1/ - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 44
[POWER] Switch [AWB] Button Manual White Balance Mode (Manual Switching) You can select the be saved in Memory A or Memory B. 1 Prepare the camera recorder. A Set the [POWER] switch to AONB. B Set WHITE A OPERATION [AWB] Activating White Detection Frame AUTO WHITE A OK Result Display - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 45
White Paint Adjustment You can fine-tune the white balance saved in Memory A or Memory B. * Adjust [White Paint R]/[White Paint B] in [Main Menu]B[Camera Process]B[White Balance] (A Page 79) When [AWB] is selected, the normal white paint adjustment value is cleared. However, you can also set to keep - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 46
as a result of the optical characteristic of the attached lens. This is not a camera malfunction. Evaluated value A value that compares the average values of the R, G, B channels in the evaluated value detection frames at the top (Top) and bottom (Btm) of the LCD monitor or viewfinder (difference - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 47
Setting the ND Filter Use the ND filter to keep the lens aperture in the appropriate range. Switch according to the brightness of the object. When the switch is changed, the position of the switched ND filter is displayed on the LCD monitor and viewfinder screens. (STATUS 1 Screen) [ND FILTER] - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 48
channels (CH-1/CH-2) in synchronization with video images on this camera recorder. The camera recorder is equipped with [INPUT1] and Set]B[Audio Set] menu to AOnB to activate the audio limiter in the Manual Adjustment Mode. This controls the recording level when excessive audio signals are input. - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 49
SELECT CH-1/CH-2] switch is disabled. Memo: ● When [Audio] in the [Camera Function]B[FULL AUTO] menu is set to ASW SetB, you can switch the recording Switch Memo: ● Alarm tone is output when there is an abnormality in the camera recorder. Alarm tone is also output when the SDHC card is full or when - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 50
input is not supported. ● Values recorded on the SDHC card is displayed in Media mode. Setting Display LCD/VF Display VIDEO Output Display TC mode of is displayed in the the LCD screen. respective video Ⅵ STATUS 1 Screen in Camera mode output images during the LCD/ VF display setting Ⅵ - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 51
[TC Preset] in the [TC/UB] menu. (A Page 82) [USER2] Button [TC GENE.] Setting Switch Memo: ● When the frame rate setting in [Main Menu]B[Record Set]B[Record Format]B[Frame & Bit Rate] is A50, 25, 24B, settings cannot be made in [Drop]. (A Page 71) ● You can configure the setting without accessing - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 52
switch is set to AREGENB. ● Menu screen is displayed. ● The camera recorder is not in Camera mode. Ⅵ Required Settings Before Preset (A Page 47) ● Set the [ setting screen appears. Cursor Cursor [TC Preset] Screen (During drop frame) [UB Preset] Screen Memo: ● Press the [USER2] button to reset each - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 53
the Recorded Time Code on SDHC card [TC GENE.] Setting Switch This camera recorder is equipped with the time code reader. Set the [TC GENE.] switch is recorded. Memo: ● When the [TC GENE.] switch is set to AREGENB, the framing mode of the time code follows the settings in [Drop] of the [TC/UB] menu - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 54
overlaps, the two zebra patterns overlap and are displayed in a grid. 3 Display the zebra pattern. Set the [ZEBRA ON/OFF] switch in front of the camera recorder to AONB to display the zebra pattern at the specified range. Zebra Pattern [ZEBRA ON/OFF] Switch Specify the upper (Top1, Top2) and lower - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 55
video or stage lighting or when specifying camera Manual] Displays the brightness (%) of the specified position. Color of frame indicating the position [Max] : Green [Min] : Yellow Green Yellow Green (Blinks in red when specifying the position) 3 Flip the [SKIN AREA/SPOT METER] switch of the camera - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 56
continued) Viewing Recorded Videos Immediately (Clip Review) Ⅵ When [Manual] is selected A review) the last recorded video clip on the screen. However, the video clip cannot be played back if the settings of the camera recorder are different from the video format (Camera Resolution/Frame & Bit Rate - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 57
video clips in the currently selected slot can be reviewed. ● When there are no clips in the selected slot, Clip Review function is disabled. ● Clip Review is Clip Review, use the [CANCEL] button to set to ASTBYCB (white text) first. (A Page 55) ● Clip Review is unavailable when the camera recorder - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 58
methods are available in this camera recorder. They are Pre REC, Clip Continuous REC, and Variable Frame REC. Select the mode from Camera mode ● Immediately after setting [Rec Mode] ● Immediately after the end of Clip Review ● Immediately after changing file format ● Immediately after changing video - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 59
Recording 2 Recording 3 Finished clip (Recorded video and audio) Recording 1 Recording 2 Recording [CANCEL] button is pressed while the camera recorder is paused (STBYC), the display changes recording is paused (STBYC, red text). ● Clip Review (A Page 52) ● Switching SDHC card slots ● Switching - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 60
quick motion videos. Using different frame rate settings for recording and playback, videos captured at normal speed can be played back more smoothly than those in low or high speed playback. To enable Variable Frame REC, the following two settings are required at the same time. ● [Camera Resolution - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 61
mode). Press the [CAM/MEDIA] selection button in Camera mode to enter SD Card mode. A thumbnail screen display. (A Page 61) The first frame of the recorded clip on the SDHC settings and returns to the previous screen. Stops video playback. Name A Cursor Description Indicates the selected clip - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 62
the settings in [Record Set]B[Record Format]B[File Format] of the [Main Menu] screen. (A Page 71) Name Description D Video Format Displays the video format (Camera Resolution/Frame Rate) that allows playback and thumbnail display. Available in 4 types: [1080/60i, 30p, 24p], [1080/50i, 25p], [720 - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 63
Name I Clip Mark Description Displays clip information (properties). A B C J Operation Guide A OK Mark Clip is appended with OK mark. Memo: ● Clips appended with OK marks cannot be deleted on the camera recorder. B Continued From Mark This mark indicates that the current clip is continued from - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 64
when the camera recorder is switched to Media mode (SD Card mode), Guide Description Shows the detailed properties of the selected clip. The following information is displayed. File Format : File format Clip Name : Clip name Resolution : Image size Frame Rate : Frame rate Bit Rate : Bit rate - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 65
the operation buttons on the side control panel of the camera recorder to play back. A B C Thumbnail Menu also output from the [HD/SD-SDI] output terminal. (A Page 86) ● User's bit output from the [HD/SD-SDI] output terminal is used as a flag to determine valid video signals. Therefore, accurate - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 66
[USER2] Button [MENU] Button Set Button (R) CrossShaped Button (JKH I) [CANCEL] Button Note: ● Clips appended with OK marks cannot be deleted on the camera recorder. ● Read-only clips can be deleted on a PC. 2 Press the [USER2] button. A screen to confirm deletion appears. 3 Use the cross-shaped - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 67
4 Use the cross-shaped button (JK) to select [Delete] and press the Set button (R). Deleting starts. 3 Memo: ● Button operations are unavailable during deletion. The deleting operation cannot be canceled. ● The cursor moves to the next clip (or previous clip if a next clip does not exist) after - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 68
can append OK marks to the clips for important scenes. Clips appended with OK marks cannot be deleted, thus protecting the important clips. When the camera recorder is in Media mode (SD Card mode), you can delete the OK marks appended during recording, or append/delete OK marks after shooting - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 69
Deleting OK Marks Ⅵ During Thumbnail Screen 1 Select a clip to delete OK mark and press the [USER1] button. The OK mark is deleted. Ⅵ During Playback or Pause Screen 1 Press the [USER1] button when playing back a clip appended with OK mark. The OK mark is deleted. 1 Memo: ● The [USER1] button is - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 70
Menu] contains all the setting items of the camera recorder, classified according to functions and uses, displayed on external monitors connected to the video signal output terminal. (A Page 86 [Analog I Scroll Bar J Setting Values K Operation Guide Indicates the current menu type with the line - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 71
to be changed. A list of setting values C appears in a popup. Guide for the current operation buttons. A pop-up displaying a list of setting Cancel] and press the Set button (R) on the side control panel of the camera recorder to abort character input and return to the previous screen. Moves the - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 72
Main Menu... (A Page 70) Record Set... (A Page 71) Record Format (A Page 71) Rec Mode (A Page 71) Clip Set (A Page 72) File Format Camera Resolution Frame & Bit Rate Clip Name Prefix Reset Clip Number Audio Set (A Page 72) Input1 Mic Ref. Input2 Mic Ref. Mic Wind Cut Audio Ref. Level Audio - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 73
Shooting Assist... (A Page 83) Marker Setting... (A Page 84) Status Display... (A Page 84) LCD + VF VF Display LCD Mirror Mode Output Terminal Down Convert Set Up HD/SD-SDI Out Analog Out Char. SDI Out Char. Audio Monitor Alarm Level Mode LED Tally System Front Tally Back Tally 1394 Rec Trigger 1394 - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 74
are displayed in gray, and they cannot be selected. Item Record Set... Camera Function... Camera Process... TC/UB... LCD/VF... A/V Out... Others... Media... Setup File Manage... Exit Function Menu screen for specifying video or audio settings during shooting and playback. The cursor does not move - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 75
). The selectable items vary according to the [File Format] and [Camera Resolution] settings. Rec Mode Menu Item Rec Mode Frame Rate When [Frame & Bit Rate] is A30p(HQ)B When [Frame & Bit Rate] is A24p(HQ)B When [Frame & Bit Rate] is A25p(HQ)B Setting Values Normal Pre Rec Clip Continuous Variable - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 76
Menu Display and Detailed Settings Record Set Menu (continued) Clip Set Menu * Default values are indicated in bold characters. Item Clip Name Prefix Reset Clip Number Setting Values xxxG (The default value of xxx is the last 3 digits of the serial number.) ^ Function For setting the first 4 - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 77
the sudden change when switching with the [GAIN] or [WHT.BAL] selection switch. However, this function is disabled when the [FULL AUTO] switch of the camera recorder is set to AONB, or when switching the gain selection switch while AALCB is set. Fast : Runs the Smooth Trans function at high speed - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 78
B.Compress4 B.Compress5 Assigns the functions of [Stretch Level] and [Compress Level] under [Black Toe] in the [Camera Process] menu. (A Page 76) LENS RET Clip Review OK Mark Focus Assist Clip Review Last 5 sec Top 5 sec CLIP For assigning a function to the [RET] button on the lens. This - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 79
the lever whenever necessary. (A Page 78) SPOT METER Max&Min Min Max Manual For specifying the operation of [Spot Meter]. (A Page 51) Max&Min button (H I) on the right of the camera recorder. AE LEVEL/VFR: Sets the number of frames during Variable Frame REC, and operates as the AE LEVEL - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 80
Menu Display and Detailed Settings Camera Process Menu * Default values are indicated in bold characters. Item and cannot be selected. Knee Level Manual Auto 100% 95%, 90%, 85%, 80%, 75%, 70% For specifying the AKneeB operation, which compresses video signals beyond a certain level to show - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 81
Max, 4 to1, Normal, -1 to -4, Min Function For setting the point to apply white clip for input video signals with a high luminance level. 100% : Applies white clip at the point where the luminance level is of the image. Restores all items in the [Camera Process] menu to their default settings. 77 - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 82
accordingly while checking the color range visually. Increase the number : Widens the range. Decrease the number : Narrows the range. Memo: ● When [Color Gain] in the [Camera Process] menu is set to AOffB, only the area where Skin Detail is functioning is displayed in skin tone. (A Page 77) 78 - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 83
This item is selectable when the [WHT.BAL] selection switch on the right of the camera recorder is set to AAB or ABB. When APRESETB is set, this item appears as shading adjustment to a fixed level. Manual adjustment is disabled. Manual : Enables manual white shading adjustment. For making white - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 84
Menu Display and Detailed Settings Camera Process Menu (continued) Shading Mode/Adjust Item * Default number : Reduces the red component of magenta/red. For adjusting the red/yellow level of the video toward red. Increase the number : Enhances the red component of red/yellow. Decrease the number - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 85
the cyan component of green/cyan. Decrease the number : Reduces the cyan component of green/cyan. For adjusting the cyan/blue level of the video toward cyan. Increase the number : Enhances the cyan component of cyan/blue. Decrease the number : Reduces the cyan component of cyan/blue. For adjusting - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 86
recording time. Memo: ● This item can be set only when the frame rate of [Frame & Bit Rate] in the [Record Set]B[Record Format] menu is set to A60pB image in color. Memo: ● The setting of this item is valid only in Camera mode. ● When this item is set to ABB, only the captured images are displayed - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 87
to 5% (In 5 % increments) 100% to 75%, 70%, 65% to 0% (In 5 % increments) Function For specifying the operation when the [FOCUS ASSIST] button on the camera recorder is pressed. (A Page 35) ACCU-Focus : Enables the Focus Assist and ACCU-Focus (forced focus) functions. The depth of field of the - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 88
Page 104 [Marker and Safety Zone Displays (Camera Mode Only)]) * Default values are indicated in of the setting, the marker does not appear during Clip Review and in Media mode. Status Display Item This menu Iris Ind. F.No Off Filter On Off Video Format On Off Media Remain On Off Function - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 89
otherwise. For more details, refer to the instruction manual of the Anton Bauer battery. ● The remaining cameras. SEC : Displays the shutter speed in seconds. Memo: ● ADEGB is selectable only when [Frame & Bit Rate] is set to A24p(SP)B, A24p(HQ)B, A25p(SP)B, or A25p(HQ)B. When [Frame & Bit Rate - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 90
output from the [Y/VIDEO]/[PB]/ [PR] video signal output terminal (BNC) on the side of the camera recorder. A setup signal can also be selected during signal input from the [IEEE1394] terminal. 7.5% : Adds setup signal. 0.0% : Setup signal is not added. Memo: ● When [Frame & Bit Rate] is set to - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 91
Function For setting the audio sound of the [PHONES] terminal to stereo or mixed sound when the [MONITOR SELECT] switch on the side of the camera recorder is set to ABothB. Mix : Outputs mixed sound (outputs mixed sound of CH-1 and CH-2 to both L and R). Stereo : Outputs stereo sound (outputs audio - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 92
] is selected. Memo: ● [Date/Time] (A Page 88 ) and [Time Zone] (A Page 88 ) cannot be reset. ● This item is not selectable when recording in Camera mode, during Clip Review, and in Media mode. Date/Time ^ For setting the year, month, day, hour, and minute. Memo: ● The display order of the date - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 93
Card]) Memo: ● This item appears only when the SDHC card needs to be restored. However, it is not selectable when recording in Camera mode and during Clip Review. Setup File Manage Menu Menu settings and button operations ([SHUTTER], [AE LEVEL], etc.) can be saved. It is useful to save settings - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 94
screen (Favorites Menu). Memo: ● [Favorites Menu] is valid only in Camera mode, and remains common even when the recording format is changed. ● Up in the following cases. [USER1 Add] is displayed in gray in the operation guide. ● Selected item is already added to [Favorites Menu]. ● Number of menu - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 95
Editing [Favorites Menu] You can delete or change the order of the items added to [Favorites Menu]. Ⅵ Deleting Items from [Favorites Menu] 1 Open the [Favorites Menu] screen. A Press the [MENU] button to open the [Main Menu] screen. B Press the [STATUS] button to open the [Favorites Menu] screen. 2 - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 96
Menu Display and Detailed Settings Adding/Editing Frequently Used Menu Items (Favorites Menu) (continued) Editing [Favorites Menu] (continued) Ⅵ Changing the Order of Items in [Favorites Menu] [USER1] Button [USER2] Button [MENU] Button Set Button (R) Crossshaped button (JKH I) [CANCEL] Button [ - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 97
4 Select the position to move to with the cross-shaped button (JK). Move the position selection bar with the cross-shaped button (JK) and select a position to move to. 5 Press the Set button (R). The selected item moves to the new position. 4 5 6 Press the [USER1] button. The option menu to exit the - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 98
recording pause) REC : Recording REVIEW : Clip Review (A Page 52) STBYP : of the shutter speed varies according to the video format settings. (A Page 38) Displays the : Manual White Balance mode (only during control using the remote control) Appears when [Black Toe] in the [Camera Process - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 99
seconds when the gain or shutter speed is manually changed. For other messages displayed in this Camera mode. TRIGGER TO HD, TRIGGER TO DV Recording command is sent out from the [IEEE1394] terminal FRAME RATE rrrr/pp fps (rrrr: recording frame rate, pp: playback frame rate) Variable frame rate - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 100
Screen in Camera Mode ( Frame Rate/Bit Rate C OK Mark D Remaining Space on Media Description Displays the video image resolution. (1920ן1080, 1440ן1080, 1280ן720) Displays the frame rate and bit rate restoring or formatting, or SDHC card is not supported (not of class 6 type). A : Write - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 101
the connected external device. For details, refer to the instruction manual of the corresponding external device. Memo: ● Only second:frame) or user's bit data. Example: Time code: 0 0 : 0 0 : 0 0 : 0 0 User's bit: Colon (:) for non-drop frames F F E E D D 2 0 Dot (.) for drop frames Memo - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 102
Status Screen Status Screen in Camera Mode (continued) STATUS 2 Screen CAMERA INFORMATION SETUP FILE SCENE G [ SCENE ] F ZEBRA1 (White card) A! : SDHC card requires restoring or formatting, or SDHC card is not supported (not of class 6 type). A : Write-protect switch of SDHC card is set. - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 103
BARS, PRESET TEMP., B.STRETCH*, B.COMPRESS*, RET, LOAD FILE) * indicates 1 to 5 Displays the setting status of the [RET] button on the lens. (CLIP REVIEW, FOCUS ASSIST, OK MARK) Displays the setting status of the [SKIN AREA/SPOT METER] switch. (SKIN AREA, SPOT METER) Displays the functions assigned - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 104
Information F Time Code (TC)/ User's Bit (UB) Description Appears when an OK mark is added. (A Page 64) Displays the video image resolution. (1920ן1080, 1440ן1080, 1280ן720) Displays the frame rate and bit rate in pairs. (60p HQ, 30p HQ, 60i HQ, 60p SP, 30p SP, 60i SP, 50p HQ, 25p HQ, 50i - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 105
/Time H Audio Level Meter I Voltage/Battery Power J Media Status K Operation Guide Description Displays the date/time that is recorded on the currently played SDHC card. direction (* reverse playback speed: 5x or 15x) : Stop mode : Power OFF Displays a guide for the current operation buttons. 101 - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 106
Level Meter D Voltage/Battery Power Description Displays the frame rate and bit rate in pairs. (60p HQ, 30p HQ, 60i HQ, 60p SP, 30p SP, 60i SP, 50p HQ, 25p HQ, 50i HQ, 50p SP, 25p SP, 50i SP, 24p HQ, 24p SP) Displays the video image resolution. (1920ן1080, 1440ן1080, 1280ן720 - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 107
STOP REC REVIEW E instruction manual of the corresponding external device. Displays the time code (hour:minute:second:frame) or user's bit data. 00:00:00:00 Colon (:) for non-drop frames Dot (.) for drop frames Memo: ● During enlarged display of the status on the LCD monitor screen, the video - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 108
Features Marker and Safety Zone Displays (Camera Mode Only) The marker and safety zone displays are useful in helping you determine the angle of view for the image according to the shooting - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 109
[Safety Zone] Display Ⅵ When [Aspect Ratio] = A4:3B, [Aspect Marker] = AHalftoneB, and [Center Mark] = AOnB [Off] [95%] [93%] [90%] [80%] [88%] [Center Mark] Display Ⅵ When [Aspect Ratio] = A4:3B, [Aspect Marker] = AHalftoneB, and [Safety Zone] = A80%B [Off] [On] Ⅵ When [Aspect Ratio] = - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 110
screen. (A Page 78) ● Select [Main Menu]B[Camera Process]B[Detail]/ [Adjust]B[Skin Color Adjust], and press the Set button (R). ● The entire image switches to black-and-white display, leaving only the detected skin areas in color. Skin Color Detection Frame Ⅵ Color Range Setting 1 Place the cursor - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 111
(A Page 77) ● When [SKIN A./SPOT M.] of [Switch Set] in the [Camera Function] menu screen is set to ASpot MeterB, the hue area cannot be checked using 1 Set the [FULL AUTO] switch to AOFFB. 2 Set [Bars] in the [Camera Function] menu to AOnB. (A Page 73). Color bars are output. Color Bar Output - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 112
AStandardB, ACinema VividB, and ACinema SubduedB in [Color Matrix] can be stored individually. (A Page 77) 1 Select [Color Matrix] or [Adjust] in the [Camera Process] menu. (A Page 80) 2 Adjust the saturation. ● Use the cross-shaped button (JK) to select a value. ● The correction range (gray area in - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 113
B&Mg B Level B&Mg Mg Level R I YI Mg B Increase the value: Corrected Y increases Decrease the value: Corrected Y decreases G Cy R I Increase the value: Mg Corrected Y decreases YI Decrease the value: B Corrected Y increases G Cy 3 Adjust Yl&G Mask Range. Adjusting [Yl&G Yl Level] and [Yl - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 114
of bright and dark areas in the image to adjust the overall balance of contrast. 1 Adjust [Black Toe] in the [Camera Process] menu according to the captured video signals. 2 Set the luminance point (Point Level) for AStretchB or ACompressB. ● Decide the luminance point (Point Level) at which the - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 115
according to the tone of the GY-HD series. [Camera Resolution] is set to A1280x720B, and [Frame & Bit Rate] is set to A50p(HQ)B. [CINEMA 1080/24p]: Setting that is suited for movie-like video shooting. [Camera Resolution] is set to A1920x1080B, and [Frame & Bit Rate] is set to A24p(HQ)B. Picture - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 116
Camera Features in gray, selection disabled) ● The inserted SDHC card is not supported (those other than SDHC Class 6 cards, or unformatted cards). ( 5 Name the file. Enter the subname using the software keyboard. Ⅵ Operating instructions of software keyboard (A Page 67) A B F C G H D E - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 117
or press the [CANCEL] button to return to the previous screen. ● When saving of a file fails, a AStore Error!B message (indicated in red frame) appears for several seconds, after which the previous screen is displayed. 8 Saving is complete. After saving of the file is complete, ACompleteB appears on - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 118
area of the camera recorder. ● Digital audio signals, together with embedded (superimposed) audio signals and time code signals, are output for both the HD-SDI and SD-SDI signals. ● User's bit output from the [HD/SD-SDI] output terminal is used as a flag to determine valid video signals. Therefore - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 119
Page 117) Playback images on the camera recorder can be stream output during editing using a non-linear editing system. VIDEO FORMAT INCORRECT ● If the [INT/EXT] IEEE1394 interface terminal switch is set at AEXTB and the AHQB mode is selected in [Frame & Bit Rate], signals will not be output from - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 120
Device Signal Flow 2 Set the camera recorder to Camera mode. 3 Set the recording video format. Note: ● Make sure that the SP mode is selected for the [Frame & Bit Rate] setting. 4 Perform the following settings on the camera recorder (master device). A Set the [HD/DV] IEEE1394 terminal mode switch - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 121
-linear editing system. For details, refer to the instruction manual of the non-linear editing system. 8 Loading is complete. After loading is complete, press the [CANCEL] button on the camera recorder to stop playback. Memo: ● Switch the [HD/DV] IEEE1394 terminal mode switch only after turning OFF - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 122
the files using the (JVC ProHD Clip Manager) PC application software in the bundled CDROM. ● For details on how to install the application software, refer to the [User's Guide] of the [SxS Memory Card Device Driver Software] inside the bundled CD-ROM. 1 Connect the camera recorder to the PC using - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 123
camera recorder can be configured using the remote control unit. * Remote control units supported: RM-LP25U, RM-LP55U, and RM-LP57U 1 Connect the remote control to the camera the camera recorder. ● Shutter speed when the frame rate of [Frame & Bit Rate] is A24pB. When the frame rate of the camera - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 124
4000*5, 1/10000*5 EEI 3 IRIS MANUAL, AUTO 3 AUTO IRIS LEVEL, 3 MANUAL IRIS LEVEL ZOOM WIDE, STOP, TELE - FOCUS NEAR, STOP, FAR - *1 : Only when the [Frame & Bit Rate] of the camera recorder is A60B, A30B, or A24B. *2 : Only when the [Frame & Bit Rate] of the camera recorder is A50B or - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 125
1/120*2 3 1/250 3 1/500 3 1/1000 3 1/2000 3 EEI 3 MASTER BLACK 3 IRIS MANUAL, AUTO 3 MANUAL LEVEL 3 AI LEVEL 3 *1 : Only when the [Frame & Bit Rate] of the camera recorder is A60B, A30B, or A24B. *2 : Only when the [Frame & Bit Rate] of the camera recorder is A50B or A25B. 121 - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 126
once every second. SDHC card is not supported (a type other than Class 6). (***: camera recorder. (***: A, B, A/B) Turn off the power, and turn it on again. If the error persists, consult your nearest JVC card for Clip Review. Insert an SDHC card that contains clips that can be reviewed. (A Page - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 127
. (Error displays for about 7 seconds) ● Video format of the file for Clip Review is different from the [Frame & Bit Rate] setting of the camera recorder. ● IEEE1394 input video format is different from the [Camera Resolution] and [Frame & Bit Rate] settings. ● [HD/DV] terminal mode switch is not - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 128
Others Troubleshooting Symptom Power does not turn on. Unable to start recording. Camera image is not output on clip has a different video format setting. ● Is the camera recorder set to the IEEE1394 Input mode? (Operation mode indicator: Lights up in orange) ● Is the [HD/DV] IEEE1394 terminal mode - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 129
VIDEO], [PB], and [PR] video signal output terminals. Incorrect display on the viewfinder. IEEE1394 connection between the camera recorder and the external device cannot be established (e.g., no image on the camera switch correctly set? ● Is the [HD/DV] IEEE1394 terminal mode switch correctly set - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 130
GY-HM700U/GY-HM700E only) Lens Filter diameter : Canon F/1.6, 14x, f = 4.4-61.6 mm (35 mm conversion: 32-448 mm) : 82 mm Storage Section Supported media Slots : SDHC (Class 6) : x2 Video/Audio Recording time Recording format : Video HQ mode SP mode : Audio Video frame rate 6-pin JVC remote - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 131
Accessories Microphone 1 Lens (GY-HM700U/GY-HM700E only) 1 Instructions 1 CD-ROM 1 Warranty Card (GY-HM700CHU/GY-HM700U only) 1 Dimensional Outline Drawing Ⅵ (Unit: mm) 40 90 95 (VF MOVE) (VF MOVE) 56 133 59.8 44.6 108.5 291 (for ANTON BATTERY) (166) 231 242.3 - JVC GY-HM700UXT | 132 page operation manual for the GY-HM700 solid state camcord - Page 132
LST0904-001B GY-HM700U/GY-HM700CHU/ GY-HM700E/GY-HM700CHE HD MEMORY CARD CAMERA RECORDER 2009 Victor Company of Japan, Limited
HD MEMORY CARD CAMERA RECORDER
GY-HM700U
GY-HM700CHU
GY-HM700E
GY-HM700CHE
INSTRUCTIONS
* The illustration shows the GY-HM700E with the supplied viewfinder, microphone and lens attached.
* GY-HM700CHU/GY-HM700CHE does not come with a lens.
For Customer Use:
Enter below the Serial No. which is located on the body.
Retain this information for future reference.
Model No.
GY-HM700U/GY-HM700CHU
Serial No.
Please read the following before getting started:
Thank you for purchasing this JVC product.
Before operating this unit, please read the instructions
carefully to ensure the best possible performance.
In this manual, each model number is described without the last letter
(U/E) which means the shipping destination. (U: for USA and Canada,
E: for Europe)
Only “U”models (GY-HM700CHU/GY-HM700U) have been evaluated by
UL.
LST0904-001B