JVC GY-HM700UXT 132 page operation manual for the GY-HM700 solid state camcord - Page 32
Adjusting the LCD Monitor and Viewfinder, Preparations, Adjusting the Angle of the LCD Monitor
View all JVC GY-HM700UXT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Preparations Adjusting the LCD Monitor and Viewfinder Adjusting the LCD Monitor You can change the angle and brightness of the LCD monitor screen according to your usage condition. Changing the brightness of the screen will not affect the recorded images. [LCD BRIGHT +/-] Button LCD Lock Release Knob 1 2 Tilt 180 degrees upward Tilt 90 degrees downward [LCD PEAKING +/-] Button Ⅵ Adjusting the Angle of the LCD Monitor 1 Slide the LCD lock release knob to open the LCD monitor. 2 Rotate the LCD monitor to adjust the angle. ● While the LCD monitor is open, you can rotate it 180 degrees upward or 90 degrees downward. ● Rotating the LCD monitor 180 degrees upward enables you to see the screen from the lens side. Select [Main Menu]B[LCD/VF]B Set [LCD Mirror Mode] to AMirrorBB Set button (R) (A Page 82) Ⅵ Adjusting the LCD Monitor Screen Adjusting contour and brightness ● Use the [LCD BRIGHT +/-] button to adjust the brightness of the LCD monitor screen. Press the [+] and [-] buttons simultaneously to return to standard settings. [+] : Press this button to brighten the screen. [-] : Press this button to darken the screen. ● During adjustment, the brightness level is displayed on the LCD monitor screen. ● During Camera mode, SD Card mode (playback), or IEEE1394 mode ● Use the [LCD PEAKING +/-] button to adjust the contour of the LCD monitor screen. Press the [+] and [-] buttons simultaneously to return to standard settings. [+] : Press the button to increase contour correction. [-] : Press the button to decrease contour correction. ● During adjustment, the contour level is displayed on the LCD monitor screen. (A Page 28 [Adjusting contour and brightness]) ● During Camera mode, SD Card mode (playback), or IEEE1394 mode ● During SD Card mode (thumbnail), menu operation, or USB mode Adjusting the Viewfinder You can change the brightness and peaking of the viewfinder screen according to your usage conditions. Changing the brightness of the screen will not affect the recorded images. [VF PEAKING] Knob [VF BRIGHT] Knob Eyepiece Focus Ring Eyepiece Slide Lock Ring Eyepiece Lock Ring Note: ● A high-definition viewfinder is used on this camera recorder in order to provide an accurate focusing environment. Due to the characteristic of the display device, colors may appear on the images when you blink your eyes. This is not a malfunction. It does not affect the recorded images, SDI output, or component output. ● During SD Card mode (thumbnail), menu operation, or USB mode 28