JVC GY-HM700UXT 132 page operation manual for the GY-HM700 solid state camcord - Page 91
Others Menu
View all JVC GY-HM700UXT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
* Default values are indicated in bold characters. Item Audio Monitor Setting Values Stereo Mix Function For setting the audio sound of the [PHONES] terminal to stereo or mixed sound when the [MONITOR SELECT] switch on the side of the camera recorder is set to ABothB. Mix : Outputs mixed sound (outputs mixed sound of CH-1 and CH-2 to both L and R). Stereo : Outputs stereo sound (outputs audio sound of CH-1 to L, and CH-2 to R). When a monitor speaker is used, only the audio sound of CH-1 is output. Ⅵ [PHONES] terminal, speaker, and RCA outputs according to the combination of the camera recorder's [MONITOR SELECT] switch settings and [Audio Monitor] settings [MONITOR SELECT] Setting [Audio Monitor] Setting Output from [PHONES] Terminal L R Speaker Output RCA Output CH1 CH2 [CH-1] [BOTH] [CH-2] ^ [Mix] [Stereo] ^ CH1 CH1+CH2 CH1 CH2 CH2 CH1 CH1+CH2 CH1 CH2 CH1 CH2 Others Menu Item Alarm Level Mode LED Tally System Front Tally Back Tally Setting Values High Middle Low Off On Off Studio Ext Int On Blink Off On Blink Off Function For selecting whether to turn on the alarm tone as well as setting the volume. Alarm tone is output from the monitor speaker or [PHONES] terminal. High : Outputs alarm tone at a high volume level. Middle : Outputs alarm tone at a medium volume level. Low : Outputs alarm tone at a low volume level. Off : Alarm tone is not output. For specifying the illumination settings of the operation mode indicator on the side control panel of the camera recorder. On : Lights up as below according to the operation mode. (A Page 7) Off : Turns off the indicator. Operation Mode Color Camera Mode Blue/Purple Media Mode (SD Card Mode) Green Media Mode (IEEE1394 Mode) Orange USB Mode Orange For setting the display conditions of the camera recorder's tally lamps (front/back). Studio : Displays according to the TALLY IN/PREVIEW IN signals from an external device, such as a remote control. Ext : Displays mainly the status of external devices. Int : Displays mainly the status of the camera recorder. For specifying the illumination settings of the camera recorder's front tally lamp during recording. On : Lights up only during recording. Blink : Blinks after the [REC] trigger button is pressed until recording starts, and lights up during recording. Off : Turns off the tally lamp. For specifying the illumination settings of the camera recorder's back tally lamp during recording. On : Lights up only during recording. Blink : Blinks after the [REC] trigger button is pressed until recording starts, and lights up during recording. Off : Turns off the tally lamp. 87