JVC GY-HM700UXT 132 page operation manual for the GY-HM700 solid state camcord - Page 54
Setting Zebra Pattern, Shooting, Specifying the Brightness Luminance
View all JVC GY-HM700UXT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Shooting Setting Zebra Pattern When the luminance level range for displaying zebra patterns is specified, diagonal lines (zebra pattern) are displayed at areas with the specified luminance levels during shooting. Specifying the Brightness (Luminance) Level Range for Displaying Zebra Pattern Memo: ● ATop2B and ABottom2B cannot be set if [Zebra] is set to A1PatternB. ● When the specified range of two zebra patterns overlaps, the two zebra patterns overlap and are displayed in a grid. 3 Display the zebra pattern. Set the [ZEBRA ON/OFF] switch in front of the camera recorder to AONB to display the zebra pattern at the specified range. Zebra Pattern [ZEBRA ON/OFF] Switch Specify the upper (Top1, Top2) and lower (Bottom1, Bottom2) limits of the luminance level. 1 Set the zebra display pattern. ● Select the display pattern in [LCD/VF]B[Shooting Assist]B[Zebra]. [Zebra1] Display [Zebra2] Display 2 Specify the brightness (luminance) level range for displaying zebra pattern. Specify the upper (Top1, Top2) and lower (Bottom1, Bottom2) limits of the luminance level in [LCD/ VF]B[Shooting Assist]B[Zebra]. Item Zebra Top1 Bottom1 Settings Zebra display pattern Upper luminance limit for displaying [Zebra1] Lower luminance limit for displaying [Zebra1] Options 1Pattern 2Patterns 5 % - 100 %, Over (in 5 % increments) 0 % - 100 % (in 5 % increments) Top2 Bottom2 Upper luminance limit for displaying [Zebra2] Lower luminance limit for displaying [Zebra2] 5 % - 100 %, Over (in 5 % increments) 0 % - 100 % (in 5 % increments) 50