JVC GY-HM700UXT 132 page operation manual for the GY-HM700 solid state camcord - Page 92

Menu Display and Detailed Settings Others Menu (continued) * Default values are indicated in bold characters. Item 1394 Rec Trigger Setting Values Ext Series Split Synchronize Off Function For setting the recording trigger for the external recording device connected to the [IEEE1394] terminal. Ext : Outputs recording trigger to the external system only. (Recording is not performed by the internal system.) Series : Outputs recording trigger to enable consecutive recording by the internal and external systems. Split : Outputs separate recording triggers to the internal and external systems. Synchronize : Outputs recording trigger simultaneously to the internal and external systems. Off : Recording trigger is not output to the external system. Memo: ● This item is selectable only in Camera mode. It cannot be set when recording is in progress on the camera recorder or an external device. ● When the external recording device connected to the [IEEE1394] terminal switches to the recording mode according to the settings, switching of operation mode using the [CAM/ MEDIA] button and the Clip Review function will be disabled. ● When [1394 Rec Trigger] is set to ASplitB, the [REC] button on the side of the camera recorder becomes a REC Start/Stop button for the external device. (A Page 10) ● When the [REC] button is pushed immediately after the power is turned on or after a menu setting is changed, recording with the external device might start about 10 seconds late. 1394 Auto Power Enable Off Disable For setting whether to automatically turn off the power of the external recording device connected to the [IEEE1394] terminal when the [POWER] switch of the camera is turned off. Enable : Turns off the power automatically. Disable : Disables this function. Memo: ● The IEEE1394 control is only valid for external devices with a POWER OFF button. Reset All ^ Resets all menu settings. Select AResetB in the [Reset All] menu and press the Set button (R). The message AResetting...B appears. After the resetting process is complete, the message ACompleteB appears for about 1 second. Reset will not be performed if [Cancel] is selected. Memo: ● [Date/Time] (A Page 88 ) and [Time Zone] (A Page 88 ) cannot be reset. ● This item is not selectable when recording in Camera mode, during Clip Review, and in Media mode. Date/Time ^ For setting the year, month, day, hour, and minute. Memo: ● The display order of the date (year, month, and day) follows the [Date Style] setting in the [Status Display] menu. However, the 24-hour format is used for the hour display regardless of the [Time Style] setting. (A Page 85) Time Zone System Information Fan Hour UTC-00:30 to UTC-12:00, For setting the UTC time difference in units of 30 minutes. UTC, UTC+14:00 to UTC+00:30 (In increments of 30 minutes) [Default values: UTC-05:00 (U model), UTC (E model)] Memo: ● If [Date/Time] is already set, the value is automatically adjusted when [Time Zone] is altered. For displaying the usage time of the internal fan. Memo: ● Under normal environment, dust will accumulate on the internal fan when the camera recorder is used over a long period. Dust may enter the camera especially if it is used outdoors. This may affect the image and sound quality of the camera recorder. Check and replace the fan after every 9000 hours (suggested guideline). 88