JVC GY-HM700UXT 132 page operation manual for the GY-HM700 solid state camcord - Page 100
Status Screen in Camera, Mode continued, Status Screen
View all JVC GY-HM700UXT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Status Screen Status Screen in Camera Mode (continued) STATUS 1 Screen A 1280x720 30/24 fps B 60p HQ C OK 00:00:00:00 DD 20 min * 0 : Same as STATUS 0 Screen (A Page 94) J I H MAX 123% MIN 45% SKIN AREA D A 100min B 100min S.DTL *0 B -3 ND1/16 A STBY 282min F5.6 AE+1 9dB 1/10000 *0 E F G Item A Resolution B Frame Rate/Bit Rate C OK Mark D Remaining Space on Media Description Displays the video image resolution. (1920ן1080, 1440ן1080, 1280ן720) Displays the frame rate and bit rate in pairs. (60p HQ, 30p HQ, 60i HQ, 60p SP, 30p SP, 60i SP, 50p HQ, 25p HQ, 50i HQ, 50p SP, 25p SP, 50i SP, 24p HQ, 24p SP) Appears when an OK mark is added. (A Page 64) Displays the remaining recording time of the SDHC cards in Slot A and Slot B separately. Memo: ● Only warnings are displayed in the STATUS 0 and STATUS 4 Screens. (When the total remaining time for the SDHC cards in slot A and slot B is less than 3 minutes) E Voltage/Battery Power F Audio Level Meter A : Currently selected slot. (White card) A! : SDHC card requires restoring or formatting, or SDHC card is not supported (not of class 6 type). A : Write-protect switch of SDHC card is set. Displays the current status of the power supply in use. Display Description 12.3V Currently powered by an AC adapter. The current voltage is shown on the right. If the supplied voltage from the AC adapter is low, the voltage value will be displayed in red as a warning. 12.3V 200min 30% Currently powered by a battery. When the battery power runs out, the battery mark appears hollow, and ARESB is displayed. The display on the right can be set using [Battery Info] of [Status Display] in the [LCD/VF] menu. (A Page 85) RES -20 dB -10 dB Displays the audio level for CH-1 and CH-2. When [Rec Mode] in the [Rec Mode] menu is set to AVariable FrameB, audio cannot be recorded and is indicated by the mark. The positions of -20 dB and -10 dB are displayed as AoB. Memo: ● You can turn ON/OFF the display using [Audio Meter] of [Status Display] in the [LCD/VF] menu. (A Page 85) 96