JVC GY-HM700UXT 132 page operation manual for the GY-HM700 solid state camcord - Page 90
A/V Out Menu
View all JVC GY-HM700UXT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Menu Display and Detailed Settings A/V Out Menu * Default values are indicated in bold characters. Item Output Terminal Setting Values Composite Component Off Function For setting output signals from the [Y/VIDEO]/[PB]/[PR] video signal output terminal (BNC) on the side of the camera recorder. Composite : Outputs composite signals to the [Y/VIDEO] video signal output terminal. Component : Outputs component signals. Off : Signals are not output. Memo: ● When DV signals are input from the [IEEE1394] terminal, AComponentB cannot be selected. When AComponentB is selected, this is switched automatically to ACompositeB output. Down Convert Set Up Side Cut Letter Box Squeeze 7.5% (U model) 0.0% (E model) For setting the style of displaying down-converted images on a 4:3 aspect ratio screen. This setting applies to all Composite/SD-SDI/DV outputs. Side Cut : Displays image with the left and right sides cut off. Letter Box : Displays as a wide image with the top and bottom blackened. Squeeze : Displays image that is squeezed horizontally. For selecting whether to add a setup signal to the video signal output from the [Y/VIDEO]/[PB]/ [PR] video signal output terminal (BNC) on the side of the camera recorder. A setup signal can also be selected during signal input from the [IEEE1394] terminal. 7.5% : Adds setup signal. 0.0% : Setup signal is not added. Memo: ● When [Frame & Bit Rate] is set to A50p(SP)B, A50p(HQ)B, A50i(SP)B, A50i(HQ)B, A25p(SP)B, or A25p(HQ)B, this item appears as A---B and cannot be selected. (A Page 71) ● Depending on the menu settings of the camera recorder and the condition of the cable connected to it, the setup signal setting may be fixed at A0.0%B. A0.0%B is displayed in gray in this case. HD/SD-SDI Out HD-SDI SD-SDI Off For specifying whether to output SDI signals from the [HD/SD-SDI] output terminal on the side of the camera recorder. HD-SDI : Outputs HD-SDI signals. Embedded (superimposed) audio signals and the time code are also output. SD-SDI : Outputs SD-SDI signals down converted from HD. Embedded (superimposed) audio signals and the time code are also output. Off : SDI signals are not output. Memo: ● When DV signals are input from the [IEEE1394] terminal, AHD-SDIB cannot be selected. ● User's bit output from the [HD/SD-SDI] output terminal is used as a flag to determine valid video signals. Therefore, accurate values will not be output. Analog Out Char. On Off For selecting whether to display status and menu characters on the screen output from the [Y/ VIDEO]/[PB]/[PR] video signal output terminal (BNC) on the side of the camera recorder. On : Turns on display. Off : Turns off display. Memo: ● When [Analog Out Char.] is set to AOnB, the details shown on the viewfinder are also displayed in the image output from the video signal output terminal (BNC). SDI Out Char. On Off For selecting whether to display status and menu characters on the screen output from the [HD/ SD-SDI] output terminal on the side of the camera recorder. On : Turns on display. Off : Turns off display. 86