JVC GY-HM700UXT 132 page operation manual for the GY-HM700 solid state camcord - Page 52
Presetting the User’s Bit, Setting Time Code Without Opening the Menu, Shooting
View all JVC GY-HM700UXT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Shooting Setting Time Code and User's Bit (continued) Presetting the User's Bit You can add an 8-digit hexadecimal number as the user's bit to the recorded image. [USER2] Button [MENU] Button Set Button (R) CrossShaped Button (JKH I) [CANCEL] Button 1 Select [Main Menu]B[TC/UB]B[UB Preset] and press the Set button (R). (A Page 82) The [UB Preset] setting screen appears. 1 [TC/UB] Menu Screen Memo: ● When the [TC GENE.] switch is set to AREGENB, the parameter is displayed as ARegenerationB and cannot be selected. 2 Use the cross-shaped button (H I) to place the cursor at the item to set, then the cross-shaped button (JK) to change the values. Numbers between 0 and 9 or alphabets between A and F can be specified for the user's bit. 3 Check the values and press the Set button (R). ● The time code is set and the screen returns to [TC/UB]. ● To cancel the setting, press the [CANCEL] button. 4 Press the [MENU] button. Returns to the normal screen. Setting Time Code Without Opening the Menu [USER1] Button [USER2] Button [MENU] Button Set Button (R) CrossShaped Button (JKH I) [CANCEL] Button Memo: ● Settings cannot be made in the following cases. ● [TC GENE.] switch is set to AREGENB. ● Menu screen is displayed. ● The camera recorder is not in Camera mode. Ⅵ Required Settings Before Preset (A Page 47) ● Set the [TC DISPLAY] switch to ATCB. ● Set the [TC GENE.] switch to settings other than AREGENB. Ⅵ Setting Time Code 1 Hold down the [MENU] button and press the [USER1] button. The [TC Preset] setting screen appears. Cursor Cursor [TC Preset] Screen (During drop frame) [UB Preset] Screen Memo: ● Press the [USER2] button to reset each digit to A0B. The cursor moves to the left. 48