JVC GY-HM700UXT 132 page operation manual for the GY-HM700 solid state camcord - Page 23
Preparations, Attaching Accessories, Attaching the Zoom Lens, Attaching the Microphone (Supplied)
View all JVC GY-HM700UXT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Preparations Attaching Accessories Attaching the Zoom Lens (Supplied with GY-HM700U/GY-HM700E only) Hole 13 Pin REC 2 Clamp 4 1 Loosen the mount ring. 2 Attach the zoom lens such that the pin matches the hole of the mounting area. 3 Tighten the mount ring. 4 Connect the cable connector. 5 Attach the lens cable to the clamp. Memo: ● Tighten the mount ring completely. If it is not fully tightened, the lens may drop or the back focus may be out of alignment. ● When attaching or removing the zoom lens, set the [POWER] switch of the camera recorder to AOFFB. Attaching the Microphone (Supplied) You can attach the supplied microphone to the microphone holder. The supplied microphone has a phantom power supply. 1 Turn the knob on the microphone holder anticlockwise to loosen and open the microphone holder. 2 Place the microphone in the microphone holder. 3 Turn the knob on the microphone holder clockwise to secure the microphone. 4 Connect the microphone cable to the [INPUT1] or [INPUT2] terminal. 5 Pin the microphone cable to the clamp. 6 Make sure to perform the correct settings for the phantom microphone (A Page 44). Knob Microphone Microphone Holder Clamp [INPUT1/INPUT2] Terminal 19