JVC GY-HM700UXT 132 page operation manual for the GY-HM700 solid state camcord - Page 56
Viewing Recorded Videos Immediately (Clip Review
View all JVC GY-HM700UXT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Shooting Setting Spot Meter (continued) Viewing Recorded Videos Immediately (Clip Review) Ⅵ When [Manual] is selected A [SPOT METER FIXED] is displayed when the switch is flipped. The brightness of the cursor position is displayed. Cursor (Green) B [SPOT METER OFF] is displayed when the switch is flipped. Displays of cursors and brightness disappear. You can check (review) the last recorded video clip on the screen. However, the video clip cannot be played back if the settings of the camera recorder are different from the video format (Camera Resolution/Frame & Bit Rate) of the clip. (A Page 71) Memo: ● To use this function, assign AClip ReviewB to any of the [USER1], [USER2], [USER3] buttons or the [RET] button on the lens. * [Main Menu]B[Camera Function]B[Switch Set]B[LENS RET]/[USER1]/[USER2]/[USER3]BAClip ReviewB (A Page 74) [RET] Button IRIS A M T W RET C [SPOT METER SELECT] is displayed when the switch is flipped. The cursor blinks in red. Move the cursor with the cross-shaped button (JKH I) to specify the position to display the brightness. When the position is decided, press the Set button (R) or flip the switch to confirm. Cursor (Blinks in red) 1 Press the button assigned with the AClip ReviewB function during standby (ASTBYB is displayed). Playback of the configured section starts. Memo: ● The video clip is played back according to the [Clip Review] settings in the [Camera Function] menu. By default setting (Last 5 sec), the last 5 seconds of the clip is played back. (A Page 74) ● When playback is complete, the camera recorder exits Clip Review and returns to ASTBYB (recording standby) mode. D Returns to the state in A. Memo: ● When moving the cursor position, [SHUTTER]/[AE LEVEL] control is disabled. ● You can also decide the position of the cursor with the Set button (R). ● When the brightness is 0 % in the entire screen, the frame is fixed in the center. 52