JVC GY-HM700UXT 132 page operation manual for the GY-HM700 solid state camcord - Page 78
Switch Set Item, Menu Display and Detailed Settings
View all JVC GY-HM700UXT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Menu Display and Detailed Settings Camera Function Menu (continued) Switch Set Item * Default values are indicated in bold characters. Item FAW GAIN L GAIN M GAIN H USER1 USER2 USER3 Setting Values None PRESET A B ALC, 18dB, 15dB, 12dB, 9dB, 6dB, 3dB, 0dB Function For assigning the FAW (Fulltime Auto White Balance) function to a position on the [WHT.BAL] selection switch. This is fixed at AFAWB when the [FULL AUTO] switch of the camera recorder is set to AONB. None : FAW function is not assigned. PRESET : Assigns FAW to the PRESET position. A : Assigns FAW to the A position. B : Assigns FAW to the B position. For setting the gain value of each position on the [GAIN] selection switch. This is fixed at AALCB when the [FULL AUTO] switch of the camera recorder is set to AONB. (Default values GAIN L: 0dB, GAIN M: 9dB, GAIN H: 18dB) By assigning one of the following functions to each of the [USER1]/[USER2]/[USER3] buttons, these buttons can be used to control the assigned function (on/off, start, switch). Set according to the shooting conditions. Functions can be assigned only in Camera mode. (Default values USER1: Bars, USER2: B.Compress3, USER3: Load File) Setting Values Description None No function is assigned. Preset Temp. Assigns the function of [Preset Temp.] under [White Balance] in the [Camera Process] menu. (A Page 79) Bars Assigns the function of [Bars] in the [Camera Function] menu. (A Page 73) Load File Assigns the function of [Load File] in the [Setup File Manage] menu. (A Page 89) Clip Review Assigns the Clip Review function. (A Page 52) B.Stretch1 B.Stretch2 B.Stretch3 B.Stretch4 B.Stretch5 B.Compress1 B.Compress2 B.Compress3 B.Compress4 B.Compress5 Assigns the functions of [Stretch Level] and [Compress Level] under [Black Toe] in the [Camera Process] menu. (A Page 76) LENS RET Clip Review OK Mark Focus Assist Clip Review Last 5 sec Top 5 sec CLIP For assigning a function to the [RET] button on the lens. This function does not work if the [RET] button is not available on the lens in use. Clip Review : Assigns the Clip Review function to the [RET] button. (A Page 52) OK Mark : Assigns the OK mark function, which operates during shooting, to the [RET] button. (A Page 54) Focus Assist : Assigns the Focus Assist function to the [RET] button. (A Page 35) For specifying the operation when [LENS RET] is set to AClip ReviewB. Last 5 sec : Views about 5 seconds of the clip from the ending. Top 5 sec : Views about 5 seconds of the clip from the beginning. CLIP : Views the entire clip. Memo: ● Selectable when [LENS RET] is set to AClip ReviewB, or when any of the [USER1]/[USER2]/ [USER3] buttons is set to AClip ReviewB. 74