JVC GY-HM700UXT 132 page operation manual for the GY-HM700 solid state camcord - Page 89
Setting Values, Function, TC/UB, Audio Meter, Battery Info, Date Style, Shutter Disp., Voltage
View all JVC GY-HM700UXT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
* Default values are indicated in bold characters. Item TC/UB Audio Meter Battery Info Setting Values On Off On Off Time Capacity% Voltage Function For specifying whether to display the time code/user's bit rate in the status display on the LCD monitor and viewfinder screens. On : Displays the time code or user's bit rate. Whether time code or user's bit rate is displayed is determined by the setting of the [TC DISPLAY] switch on the inner panel of the camera recorder's LCD monitor. Off : Hides the time code or user's bit rate. For specifying whether to display the audio level meter in the status display on the LCD monitor and viewfinder screens. On : Displays the audio level meter. Off : Hides the audio level meter. For setting the display of the status screen when a battery is loaded. The status screen is displayed on the LCD monitor and/or viewfinder. The battery information appears only on the STATUS 1 Screen in Camera mode. (A Page 96) Time : Displays the remaining battery power in minutes. AminB Capacity% : Displays the remaining battery power in percentage. A%B Voltage : Displays the current battery voltage in units of 0.1 V. AVB Memo: ● ATimeB display is disabled when an IDX battery is loaded. Even when ATimeB is selected, this is displayed as AVoltageB. ● When ATimeB or ACapacity%B is selected, the battery mark that appears before the value changes according to the remaining battery power. RES : 12 % and below, : 13 % - 29 %, : 30 % - 59 %, 2: 60 % - 100 % ● Display changes to A RES B once the battery power falls below 12 %. ● When calibration of the battery is required, A CAL B appears for 2 seconds after every 30 seconds of the voltage display. ● CALIBRATION is a state that requires renewal of the battery power information. The battery is able to function as usual without calibration. However, calibration is recommended as correct information of the remaining power and time cannot be obtained otherwise. For more details, refer to the instruction manual of the Anton Bauer battery. ● The remaining battery power and remaining time are intended as reference values for the shooting duration. Date Style Time Style Shutter Disp. DMY (E model) MDY (U model) YMD 24hour (E model) 12hour (U model) DEG SEC For setting the date display sequence in the status display on the LCD monitor and viewfinder screens. DMY : Day/Month/Year MDY : Month/Day/Year YMD : Year/Month/Day For setting the time display in the status display on the LCD monitor and viewfinder screens. 24hour : 24-hour display. 12hour : 12-hour display. (AM/PM) For setting the shutter display in the status display on the LCD monitor and viewfinder screens. DEG : Displays the shutter speed in degrees in the same way as film cameras. SEC : Displays the shutter speed in seconds. Memo: ● ADEGB is selectable only when [Frame & Bit Rate] is set to A24p(SP)B, A24p(HQ)B, A25p(SP)B, or A25p(HQ)B. When [Frame & Bit Rate] is set to other values, the shutter display setting is fixed at ASECB and cannot be selected. (A Page 71) ● When a remote control is connected, the shutter display setting is fixed at ASECB regardless of the [Frame & Bit Rate] setting. 85