JVC GY-HM700UXT 132 page operation manual for the GY-HM700 solid state camcord - Page 107

Enlarged Status Display on LCD Monitor You can enlarge and display only the characters of the status screen on the LCD monitor. CH1 A CH2 B DF C FREE J A STBY D 1280 x 720 DD min 60p HQ 100min I B 123 min OK 67.8min STBY STOP REC REVIEW E FG H Item A Audio Level Meter Description Displays the audio levels of [CH-1] and [CH-2]. If the reference audio level (A-20dBB or A-12dBB) is exceeded, this is displayed in yellow. The AOverB area is displayed in red. A48kB is the sampling frequency. Memo: ● When [Rec Mode] in the [Rec Mode] menu is set to AVariable FrameB, audio cannot be recorded and is indicated by the mark. B Framing Mode C Time Code Generator D Media Status E Remaining Space on Media F OK Mark G Video Format H Voltage/Battery Power Displays the framing mode. [DF] : Drop frame [NDF] : Non-drop frame Displays the operation mode of the time code. (Display: [FREE], [RECR], [REGN]) (A Page 46) Displays the SDHC card status in characters and symbols. ---- : No card found in the selected slot STBY : Recording standby (recording pause) REC : Recording REVIEW : Clip Review (A Page 52) STBYP : Pre Rec recording standby (A Page 54) RECP : Pre Rec recording (A Page 54) STBYC : Clip Continuous recording standby (A Page 55) RECC : Clip Continuous recording (A Page 55) STBYC (displayed in red) : Clip Continuous recording pause (A Page 55) STOP : Unable to record to the card in the slot POFF : Power OFF Displays the remaining recording time on the SDHC card. The currently active slot is indicated with an enlarged black card icon with white letters. A key mark appears when the write-protect switch of the SDHC card is set. Appears as [OK] when the currently played clip is appended with an OK mark. Displays the video format that is set. (A Page 36) Displays the current status of the power supply in use. Display Description 12.3V Currently powered by an AC adapter. The current voltage is shown on the right. If the supplied voltage from the AC adapter is low, the voltage value will be displayed in red as a warning. 12.3V 200min 30% RES Currently powered by a battery. When the battery power runs out, the battery mark appears hollow, and ARESB is displayed. Memo: ● The display on the right can be set using [Battery Info] of [Status Display] in the [LCD/ VF] menu. (A Page 85) I Operation of External Device J Time Code (TC)/ User's Bit (UB) Displays the operating status of the connected external device. For details, refer to the instruction manual of the corresponding external device. Displays the time code (hour:minute:second:frame) or user's bit data. 00:00:00:00 Colon (:) for non-drop frames Dot (.) for drop frames Memo: ● During enlarged display of the status on the LCD monitor screen, the video image remains displayed on the viewfinder. 103