JVC GY-HM700UXT 132 page operation manual for the GY-HM700 solid state camcord - Page 29
Setting the Clock (Initial Setting), Screen, Changing the Time after Initial Setting
View all JVC GY-HM700UXT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Setting the Clock (Initial Setting) Set the date/time of the built-in clock in the [Initial Setting] screen. The configured date/time data is saved in the built-in rechargeable battery even if the power is turned off. Setting the Clock in the [Initial Setting] Screen The [Initial Setting] screen appears when the power is turned on for the first time and when the built-in battery is turned on again after being fully discharged. All operations are disabled until initial settings are complete. [MENU] Button Cross-Shaped Button (JKH I), Set button (R) 2 Specify [Time Zone] and [Date/Time]. A Move the cursor with the cross-shaped button (H I) and select the setting item. B Change the values with the cross-shaped button (JK). 3 Press the Set button (R) after setting is complete. The clock is set to 0 seconds of the input date/time. Memo: ● The configured date/time data can be displayed on the LCD monitor and viewfinder and be recorded to the SDHC card. ● The value of the year can be set in the range of A2000B to A2099B. Changing the Time after Initial Setting Ⅵ Setting the date/time (A Page 88) 1 Select [Others]B[Date/Time]. The [Date/Time] setting screen appears. [POWER] Switch 1 Set the [POWER] switch to AONB. The [Initial Setting] screen appears. Ⅵ For GY-HM700CHU/GY-HM700U 2 Set the date and time. A Move the cursor with the cross-shaped button (H I) and select the setting item. B Change the values with the cross-shaped button (JK). 3 Press the Set button (R) after setting is complete. The clock is set to 0 seconds of the input date/time. Ⅵ For GY-HM700CHE/GY-HM700E 25