Konica Minolta Kodak i780 Image Processing Guide - Page 11
Single-stream duplex alternating between black and white and color/grayscale (Toggle patch)
View all Konica Minolta Kodak i780 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Single-stream duplex alternating between black and white and color/ grayscale (Toggle patch) Single-stream duplex alternating between black and white and color/grayscale using automatic color detection This job stream is available for i620, i640, i660 and i780 Scanners. For the i610 Scanner, you can only toggle between black and white and grayscale. 1. Prepare documents with a Type 4/Toggle patch before and after any color/grayscale documents. 2. Configure image processing parameters for all four images. Before enabling the scanner, select only the front and rear black and white images to be retrieved. 3. Select One - based on Toggle Patch on the Advanced tab (TWAIN) or In the images per side drop-down box on the Image Processing tab (ISIS). 4. Start scanning. Images begin in black and white and will change to color/grayscale when the first toggle patch is detected. Images remain in color/ grayscale until the next toggle patch is detected. Images of the toggle patch sheets will not be returned to the host. This job stream is available for i620, i640, i660 and i780 Scanners. For the i610 Scanner, you can only toggle between black and white and grayscale. 1. Configure image processing parameters for all four images. Before initiating the scanner, select only the front and rear black and white images to be retrieved. 2. Enable Auto Color Detection by choosing Low, Medium, High or Custom. 3. Start scanning. The scanner will determine if it should return a black and white or color/ grayscale image based on a document-by-document analysis of the color content. A-61504 October 2007 2-7