Konica Minolta bizhub C3350 bizhub C3850/C3350 Applied Functions User Guide - Page 39

Communication Type], Protocol Setting]

Page 39 highlights

1.5 Available operations in Administrator mode 1 8 From [IPsec Policy] on [IPsec] screen, click [Edit], then configure the following settings. Item [Name] [Peer] [Protocol Setting] [SA] [Communication Type] [Action] Description Enter a name for the IPsec policy (using up to 10 characters). Select a peer setting. Select the setting from those registered in [Peer] on the [IPsec Settings] screen. Select an appropriate protocol. Select the setting from those registered in [Protocol Setting] on the [IPsec Settings] screen. Select a peer setting. Select the setting from those registered in [SA] on the [IPsec Settings] screen. Select a direction of IPsec communication. Select an action to be taken for the IP packets that met [Peer], [Protocol Setting], and [Communication Type]. • [Protected]: Protect the IP packets that met the conditions. • [Allow]: Do not protect the IP packets that met the conditions. • [Deny]: Discard the IP packets that met the conditions. • [Refuse]: Refuse the IP packets that met the conditions. 9 In the administrator mode, select [Security] - [IPsec] - [Communication Check], then check that a con- nection with a peer can be established normally by the specified setting. % Enter the peer's IP address into [IP Address], then click [Check Connection]. [Applied Functions] 1-33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148

1.5
Available operations in Administrator mode
1
[Applied Functions]
1-33
8
From [IPsec Policy] on [IPsec] screen, click [Edit], then configure the following settings.
9
In the administrator mode, select [Security] - [IPsec] - [Communication Check], then check that a con-
nection with a peer can be established normally by the specified setting.
%
Enter the peer's IP address into [IP Address], then click [Check Connection].
Item
Description
[Name]
Enter a name for the IPsec policy (using up to 10 characters).
[Peer]
Select a peer setting.
Select the setting from those registered in [Peer] on the [IPsec Settings]
screen.
[Protocol Setting]
Select an appropriate protocol.
Select the setting from those registered in [Protocol Setting] on the [IPsec Set-
tings] screen.
[SA]
Select a peer setting.
Select the setting from those registered in [SA] on the [IPsec Settings] screen.
[Communication Type]
Select a direction of IPsec communication.
[Action]
Select an action to be taken for the IP packets that met [Peer], [Protocol Set-
ting], and [Communication Type].
[Protected]: Protect the IP packets that met the conditions.
[Allow]: Do not protect the IP packets that met the conditions.
[Deny]: Discard the IP packets that met the conditions.
[Refuse]: Refuse the IP packets that met the conditions.