Konica Minolta bizhub C3350 bizhub C3850/C3350 Applied Functions User Guide - Page 41
[Limiting Access to Destination] - [Restrict User Access], [Auto Logout]
View all Konica Minolta bizhub C3350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
1.5 Available operations in Administrator mode 1 Item [Send Client Certificate] [Server ID] [Encryption Strength] [Network Stop] Description Select whether or not to encrypt the authentication information using a certificate for this machine, if necessary. This setting can be configured if the following conditions are satisfied: • The certificate is registered on this machine • [EAP-TTLS], [PEAP], or [Server Specification] is selected from [EAP Type]. To verify CN of the certificate, enter the server ID (using ASCII characters of up to 64 bytes). If [EAP-TLS], [EAP-TTLS], [PEAP], or [Server Specification] is selected from [EAP Type], select an encryption strength for encryption by TLS, if necessary. • [Medium]: Keys that are more than 56 bits in length are used for communi- cation. • [High]: Keys that are more than 128 bits in length are used for communica- tion. [Medium] is specified by default. Specify the delay time between the start of an authentication process and the end of network communication, if necessary. If an authentication process does not succeed within the specified time, all network communication will stop. To specify the delay time, set [Network Stop] to [Enable], and enter the delay (sec.) in [Limit Time]. To restart the authentication process after network communication stopped, reboot this machine. [Disable] is specified by default. [Limiting Access to Destination] - [Restrict User Access] To display: Administrator mode - [Security] - [Limiting Access to Destination] - [Restrict User Access] Specify the functions for which user operation is restricted. Item [Registering and Changing Addresses] [Changing the "From" Address] Description Select whether or not to allow the user to register or change destinations. [Allow] is specified by default. To disable changing the sender's address ("From" address) by user for E-mail transmissions, select [Administrator E-mail Address] or [Login User Address]. • [Administrator E-mail Address]: Set the administrator's E-mail address to "From" address. • [Login User Address]: When user authentication is employed, set the user's E-mail address to "From" address. If the user's E-mail address is not registered, Set the machine's E-mail address to "From" address. [Allow] is specified by default. [Auto Logout] To display: Administrator mode - [Security] - [Auto Logout] - [Auto Logout] If you do not operate this machine for a given period of time after you log in to Web Connection, you will automatically be logged out. If necessary, you can change the time period before you are automatically logged out. Item [Admin Mode Logout Time] [User Mode Logout Time] Description Select a time period until the user is automatically logged out of the administrator mode. [10] minutes is specified by default. Select a time period until the user is automatically logged out of the user mode. [60] minutes is specified by default. [Applied Functions] 1-35