Konica Minolta bizhub C3350 bizhub C3850/C3350 Applied Functions User Guide - Page 46
Print to PS Error], Print Quality Settings]
View all Konica Minolta bizhub C3350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
1.5 Available operations in Administrator mode 1 Item [Wait Timeout] [PS Protocol] [Print to PS Error] [Auto Trapping] [Black Overprint] [Print Quality Settings] [Image Printing] [Text Printing] [Graphics Printing] [Simulation] Description Specify the time-out period after it is judged as PS error. If you select [0], time-out will not work. [0] is specified by default. Select the protocol that is used for PS data communication. If you select [Auto], an appropriate protocol is automatically determined from the PS print jobs. [Auto] is specified by default. Select whether or not to print error information when an error occurs during PS rasterization. [Off] is specified by default. Select whether or not to enable the auto trapping. If you enable the auto trapping, printing is carried out by superimposing neighboring colors so as to prevent white space being generated around a picture. [Off] is specified by default. Select whether or not to enable the black overprint. Enable the black overprint to superimpose black color on a neighboring color to print so as to prevent white space being generated around black characters or figures. • [Text]: Printing is carried out by superimposing black color on neighboring colors only in the text portion. • [Text/Graphic]: Printing is carried out by superimposing black color on neighboring colors in both of the text portion and figure portion. [Off] is specified by default. Adjust the image quality for PostScript printing. Select the RGB image data processing method. • [RGB Source]: Specify the color space of the input RGB. [sRGB] is speci- fied by default. • [RGB Intent]: Specify the color conversion property that is changed from in- put RGB to device CMYK. [Photographic] is specified by default. • [RGB Gray Treatment]: Specify the printing method of black and gray colors. [Composite Black] is specified by default. • [Destination Profile]: Specify the output profile. [Auto] is specified by de- fault. Select the RGB text data processing method. • [RGB Source]: Specify the color space of the input RGB. [sRGB] is speci- fied by default. • [RGB Intent]: Specify the color conversion property that is changed from in- put RGB to device CMYK. [Vivid] is specified by default. • [RGB Gray Treatment]: Specify the printing method of black and gray colors. [Black and Gray] is specified by default. • [Destination Profile]: Specify the output profile. [Auto] is specified by de- fault. Select the RGB graphic data processing method. • [RGB Source]: Specify the color space of the input RGB. [sRGB] is speci- fied by default. • [RGB Intent]: Specify the color conversion property that is changed from in- put RGB to device CMYK. [Vivid] is specified by default. • [RGB Gray Treatment]: Specify the printing method of black and gray colors. [Black and Gray] is specified by default. • [Destination Profile]: Specify the output profile. [Auto] is specified by de- fault. Configure the simulation settings. • [Profile]: Select the simulation profile for input CMYK. [None] is specified by default. • [Intent]: Specify the color conversion property for simulation. [Relative Color] is specified by default. • [CMYK Gray Treatment]: Specify the printing method of plate K in the CMYK input data for simulation. [Composite Black] is specified by default. [Applied Functions] 1-40