Home » Konica Minolta Manuals » Multifunction Devices » Konica Minolta bizhub C360 » Manual Viewer

Konica Minolta bizhub C360 bizhub C220/C280/C360 Fax Driver Operations User Ma - Page 29

Windows 2000

View all Konica Minolta bizhub C360 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

3.4 Installing using plug and play 3 5 Under [Search for the best driver in these locations.], select [Include this location in the search:], and then click [Browse]. 6 Select a desired fax driver folder on the CD-ROM, and then click [Open]. % Select a folder according to the printer driver, operating system, and language to be used. 7 Click [Next >], and then follow the instructions on the pages that follow. % If the [Windows Logo testing] or [Digital Signature] window appears, click [Continue Anyway] or [Yes]. 8 Click [Finish]. 9 After finishing the installation, make sure that the icon for the installed printer is displayed in the [Printers and Faxes] window. 10 Remove the CD-ROM from the CD-ROM drive. This completes the fax driver installation. 3.4.3 Windows 2000 1 Connect this machine to the computer using a USB cable, and then start the computer. NOTICE During startup of the computer, do not unplug or plug the cable. 2 Insert the printer driver CD-ROM into the CD-ROM drive of the computer. 3 Turn on the main power of this machine. [Found New Hardware Wizard] appears. 4 Select [Search for a suitable driver for my device (recommended)], and then click [Next >]. 5 Select [Specify a location], and then click [Next >]. 6 Click [Browse...]. 7 Select a desired fax driver folder on the CD-ROM, and then click [Open]. % Select a folder according to the printer driver, operating system, and language to be used. 8 Click [OK], and then follow the instructions on the pages that follow. % If the [Digital Signature] window appears, click [Yes]. 9 Click [Finish]. 10 After finishing the installation, make sure that the icon for the installed printer is displayed in the [Print- ers] window. 11 Remove the CD-ROM from the CD-ROM drive. This completes the fax driver installation. bizhub C360/C280/C220 3-18

Section	Page
Table of contents	2
1 Introduction	5
1.1 About this manual	5
1.1.1 Configuration of this manual	5
1.1.2 Elliptical expression	5
1.1.3 Screen shots used in this manual	5
1.1.4 Explanation of manual conventions	6
2 Overview	8
2.1 Printer controller	8
2.1.1 Roles of printer controller	8
2.1.2 PC-FAX transmission procedures	8
2.2 Operating environment	10
2.2.1 Connectable computers and OS	10
Windows	10
2.3 Setup procedures	11
2.3.1 For network connection	11
2.3.2 For local connection	11
3 Installation of Fax Driver	13
3.1 Connection method and installation procedure	13
3.1.1 Windows Vista/Server 2008	13
3.1.2 Windows 2000/XP/Server 2003	14
3.1.3 Windows NT4.0	14
3.2 Installer-based auto install	15
3.2.1 Operating environment of the installer	15
3.2.2 Settings of this machine	15
TCP/IP settings of this machine	15
RAW port number/IPP setting of this machine	16
3.2.3 Installing	16
3.3 Installation using Add Printer Wizard	20
3.3.1 Settings of this machine	20
TCP/IP settings of this machine	20
RAW port number setting of this machine	20
LPD setting of this machine	20
3.3.2 Windows Vista/Server 2008	20
3.3.3 Windows XP/Server 2003	23
3.3.4 Windows 2000/NT 4.0	26
3.4 Installing using plug and play	28
3.4.1 Windows Vista/Server 2008	28
3.4.2 Windows XP/Server 2003	28
3.4.3 Windows 2000	29
3.5 Uninstalling the fax driver	30
3.5.1 When the fax driver uninstaller is installed	30
3.5.2 When the fax driver uninstaller is not installed	30
4 Fax Driver Setting	33
4.1 Sending a fax	33
4.1.1 Sending operation	33
4.1.2 Selecting a recipient from a phone book	34
4.1.3 Selecting a recipient from an address book	35
4.1.4 Configuring the transmission conditions	37
4.1.5 Creating a fax cover sheet	37
4.2 Settings	40
4.2.1 Common Settings	40
4.2.2 [FAX] tab	41
4.2.3 [Basic] tab	42
4.2.4 [Layout] tab	42
4.2.5 [Stamp/Composition] tab	42
4.2.6 [Quality] tab	42
4.2.7 [Configure] tab	42
4.2.8 [Settings] tab	43
4.3 Configuring the [FAX] tab settings	44
4.4 Configuring the [Basic] tab settings	45
4.4.1 Configuring a custom size	45
4.4.2 Configuring user authentication settings	46
4.4.3 Configuring account track settings	47
4.5 Configuring the [Layout] tab settings	48
4.5.1 Combining pages (N in 1 or performing Poster Mode printing)	48
4.6 Configuring the [Stamp/Composition] tab	49
4.6.1 Sending by printing a watermark	49
4.6.2 Editing a watermark	49
4.7 Configuring the [Quality] tab settings	51
4.8 Configuring the [Configure] tab settings	52
4.8.1 Selecting the option	52
4.8.2 Changing the encryption passphrase	53
4.9 Using phone books	54
4.9.1 Adding recipients to a phone book	54
4.9.2 Editing a phone book	56
Changing the personal information	56
Changing group membership	56
Changing a group name	56
Creating a folder	57
Searching for personal information	57
4.10 Saving the fax driver settings	58
4.10.1 Saving the settings	58
4.10.2 Recalling settings	59
4.10.3 Editing settings	59
4.10.4 Importing settings/Exporting settings	59
5 Troubleshooting	62
5.1 Cannot send faxes	62
5.2 Cannot configure settings/cannot send faxes according to the settings	63
5.2.1 Error message	63
6 Appendix	65
6.1 Glossary	65
7 Index	70
7.1 Index by item	70
A to W	70
7.2 Index by button	71

Match case Limit results 1 per page

bizhub C360/C280/C220

3-18

3.4

Installing using plug and play

Under [Search for the best driver in these locations.], select [Include this location in the search:], and

then click [Browse].

Select a desired fax driver folder on the CD-ROM, and then click [Open].

Select a folder according to the printer driver, operating system, and language to be used.

Click [Next >], and then follow the instructions on the pages that follow.

If the [Windows Logo testing] or [Digital Signature] window appears, click [Continue Anyway] or

[Yes].

Click [Finish].

After finishing the installation, make sure that the icon for the installed printer is displayed in the [Printers

and Faxes] window.

Remove the CD-ROM from the CD-ROM drive.

This completes the fax driver installation.

3.4.3

Windows 2000

Connect this machine to the computer using a USB cable, and then start the computer.

NOTICE

During startup of the computer, do not unplug or plug the cable.

Insert the printer driver CD-ROM into the CD-ROM drive of the computer.

Turn on the main power of this machine.

[Found New Hardware Wizard] appears.

Select [Search for a suitable driver for my device (recommended)], and then click [Next >].

Select [Specify a location], and then click [Next >].

Click [Browse...].

Select a desired fax driver folder on the CD-ROM, and then click [Open].

Select a folder according to the printer driver, operating system, and language to be used.

Click [OK], and then follow the instructions on the pages that follow.

If the [Digital Signature] window appears, click [Yes].

Click [Finish].

After finishing the installation, make sure that the icon for the installed printer is displayed in the [Print-

ers] window.

Remove the CD-ROM from the CD-ROM drive.

This completes the fax driver installation.