Kyocera FS-6525MFP Kyocera Command Center RX User Guide Rev-1.60 - Page 52

Settings Pages ECM Reception Turns error correction mode on which corrects errors that may happen during communication. To use error correction, error correction mode must be turned on at both parties. Remote Switching Dial Number Specifies the remote switching dial number. You can specify it within a range of 00 to 99. Remote switching allows you to initiate FAX reception from a telephone connected to the FAX system. Encryption Key No. Sets the encryption key number to be used for encrypted communication. F-NET Sets the silent reception. (Available only in Japan.) Dial-in Activates the dial-in (direct number) call. (Available only in Japan.) Dial-in Number Specifies the telephone number for direct number. (Available only in Japan.) Reception Port Sets the receive-only port. (Available in multiport mode). Number of Rings (Normal) Specifies the number of rings for Auto FAX reception (Normal). You can specify it within a range of 1 to 15. Number of Rings (TAD) Specifies the number of rings for Auto FAX reception (TAD). You can specify it within a range of 1 to 15. Number of Rings (FAX/TEL) Specifies the number of rings for Auto FAX reception (FAX/TEL). You can specify it within a range of 0 to 15. This is not displayed on European models. FAX / i-FAX > FAX > FAX Restrictions > General The table below provides a summary of the items displayed on the FAX Restrictions > General page. Transmit Restriction Selects the transmitting restriction between Off and Use Permit List + Address Book. Receive Restriction Selects the receiving restriction between Off, Use Permit List + Address Book, and Use Reject List. Unknown Number Reception Displayed when Use Reject List is selected in Receive Restriction. This determines the behavior when the machine has received a FAX with an unknown FAX number. Select Permit to permit reception of unknown numbered faxes and select Reject to reject unknown numbered faxes. 6-28 User Guide