Kyocera TASKalfa 181 181/221 Operation Guide Rev-2 - Page 100

Copying Functions Program Function After registering sets of frequently used functions as a single program, you can simply press the program number as needed to recall those functions. You can also name the programs for easy identification when recalling. Registering Programs Use the procedure below to register a program. The following procedure is an example of registering the copying function. 1 Press the Program key while the copy mode is accessed. Program : Program #7 Program #8 Register program . 2 Press U or V to select Register program, and then press the Enter key. NOTE: If you select a program number already registered, the currently registered functions can be replaced with a new set of functions. Register program : Program #1 Program #2 Program #3 3 Press U or V to select the program number to register (1 to 8), and then press the Enter key. The program is registered. NOTE: You can also select the program number using a numeric key. Recalling Programs Use the procedure below to recall a registered program. 1 Press the Program key. Program : Program #1 Program #2 Program #3 2 Press U or V to select the program number to recall, and then press the Enter key. NOTE: You can also select the program number using a numeric key. 3 Place the originals and press the Start key. Copying starts with the settings that were registered. 4-32 OPERATION GUIDE