Kyocera TASKalfa 181 181/221 Operation Guide Rev-2 - Page 170

System Menu Custom Paper Type Printing onto prepunched paper, preprinted paper or letterhead in the one-sided mode and the two-sided mode from the same paper source may cause displacement of hole positions or reverse orientations on both sides in two-sided printing. Set Match Print Direction to match the orientation in one-sided printing and two-sided printing. Example: Paper is set as shown in the illustration. Setting Match Print Direction Fast Mode One-sided printing Two-sided printing NOTE: Setting of Match Print Direction will decrease the speed of one-sided printing a little. With the setting of Match Print Direction, set the paper with the side for the first page face-down as shown in illustration A. (If the optional finisher is installed, set the paper with the side for the first page face-down as shown in illustration B.) A B If the optional finisher is installed, the stapling mode may cause incorrect orientation of printing depending on the stapling position Machine Default : P. Type (Weight) P. Type (2sided) Specific P . Type : Fast Mode Specific Paper Type : Match Print Direction * Fast Mode 1 Display the Machine Default screen. (See How to Display the Machine Default Screen on page 6-13.) 2 Press U or V to select Special P.type, and then press the Enter key. 3 Press U or V to select Match Print Direction or Fast Mode, and then press the Enter key. 4 Press the Reset key. The message display returns to the copier basic screen. 6-18 OPERATION GUIDE