Kyocera TASKalfa 181 181/221 Operation Guide Rev-2 - Page 148

Printing Functions Auto Continue If any of the following error messages appears, the error can be cleared and printing can be continued after the preset recovery time elapses (auto continue). • Memory Overflow/Press GO • Print overrun Press GO • KPDL error Press GO • File not found Press GO • HARD DISK error Press GO • RAM disk error Press GO • MemoryCard err Press GO • Illegal Account Press GO • Exceeded Max.out Press GO • Account error Press GO • Duplex disabled Press GO • Add Staples and Press GO • e-MPS not stored Press GO • Opt. ROM error Press GO Also you can set the time that elapses before auto continue is activated. 1 Display the Others screen. (See How to Display the Others Screen on page 5-45.) Others Printer Reset Resource Prot . Auto Continue 2 Press U or V to select Auto Continue, and then press the Enter key. Auto Continue Back On Off 3 Press U or V to select On or Off, and then press the Enter key. If you have selected On, Change # is displayed. Auto Continue On Off Change # Auto Continue (Time) 30 sec. (0 495) 4 To set the time that elapses before auto continue is activated, press U or V to select Change #, and then press the Enter key. The Auto Continue (time) screen is displayed. 5 Press Y or Z to enter the time, and then press the Enter key. You can set the time to 0 to 495 seconds in 5 second increments. 5-48 OPERATION GUIDE