Kyocera TASKalfa 181 181/221 Operation Guide Rev-2 - Page 220
Print, Enter, Error Message, Checkpoints, Corrective Actions, Reference, Troubleshooting
View all Kyocera TASKalfa 181 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 220 highlights
Troubleshooting Error Message Checkpoints Corrective Actions Reference Page Clean the slit glass for original fed from DP. [Clean the slit glass original fed from DP.] The slit glass is dirty. Clean the slit glass because black - lines may be copied when the optional document processor is used. Close ## cover. The indicated cover is Close all the covers securely. - open. Exceed copy limit. The number of copies Use the department management 7-11 Unable to copy made with your mode to clear the copy count. management code has reached the limit that was set in the department management mode and copying is no longer possible with that code. Format error Memory The memory card inserted Format the memory card. - card in the machine must be formatted. Interface occupied The selected interface is Wait for a while and retry. - currently being used. Insert same memory When the machine has Insert the memory card again. - card tried to read data from the memory card, it cannot recognize the memory card. NOTE: When inserting the memory card, turn the main power switch off. MemoryCard err Press GO An error has occurred in Press the Print key, select GO, and - writing to or reading from then press the Enter key. The error the memory card. will be cleared, 9-6 OPERATION GUIDE