Kyocera TASKalfa 181 181/221 Operation Guide Rev-2 - Page 176
Reset, Display Contrast Adjustment, Enter, Administrator Management Code Change, IMPORTANT
View all Kyocera TASKalfa 181 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 176 highlights
System Menu 10 Press the Reset key. The message display returns to the copier basic screen. Display Contrast Adjustment Adjust the display contrast if the message display is indistinct. 1 Display the Machine Default screen. (See How to Display the Machine Default Screen on page 6-13.) Machine Default : Key Sound On /Off Date/Time : Display Contrast : On : 08:48 : 2 Press U or V to select Display Contrast [Displ. Contrast], and then press the Enter key. Display Contrast Adjustment : * 3 Press Y or Z to adjust the contrast, and then press the Enter key. Moving left darkens the contrast, and moving right lightens it. 4 Press the Reset key. The message display returns to the copier basic screen. Administrator Management Code Change You can change the four-digit management code for the administrator of this machine. IMPORTANT: If you change the management code, be sure to note it. If you should forget the management code, contact your service representative. The management code at the factory default setting is 1800 for the 18 ppm model and 2200 for the 22 ppm model. 1 Display the Machine Default screen. (See How to Display the Machine Default Screen on page 6-13.) Machine Default : Date/Time : Display Contrast Admin. Code : 08:48 : 2 Press U or V to select Admin. Code, and then press the Enter key. Admin. Code Change : 1800 # keys 3 Enter the new administrator management code using the numeric keys, and then press the Enter key. 6-24 OPERATION GUIDE