Kyocera TASKalfa 181 181/221 Operation Guide Rev-2 - Page 94
Book to One-sided, Duplex, Enter, Start, A4R, B5R, A5R, 11 x 17 Ledger
View all Kyocera TASKalfa 181 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Copying Functions Book to One-sided 1 2 1 Produces a 1-sided copy of a 2-sided or open book original. 2 Original Copy Book to Two-sided 1 2 3 4 Original 4 2 3 1 Copy Produces two-sided copies from an open book original with facing pages. NOTE: The original sizes that can be used are A3, B4, A4R, B5R, A5R, 11 x 17" (Ledger), 8 1/2 x 11" (Letter), and 8K. The paper sizes are limited to 11 x 8 1/2" and 16K in the inch specifications and A4, B5, and 16K in the metric specifications. The paper size can be changed and the zoom ratio adjusted to fit the size of the paper. The procedure for using two-sided/duplex copying is explained below. 1 Press the Copy key. 2 Place the originals on the platen. 3 Press the Duplex key. Duplex : 1 sided 2 sided 2 sided 2 sided Book 2-sided 4 Press U or V to select the desired duplex copy mode, and then press the Enter key. If you have selected 1 sided->2 sided [1-sided->2sided], proceed to the next step. If you have selected 2 sided->2 sided [2-sided->2sided], or Book->2-sided, proceed to step 7. Saddle Stitch Direction : Left Side Top Side 5 Press U or V to select the desired finished stitch side, and then press the Enter key. 6 Press the Start key to start scanning. If the originals have been set in the optional document processor, copying starts automatically. If the original has been set on the platen, a message prompting replacement of the original is displayed. In this case, proceed to the next step. 7 Replace the original, and then press the Start key. 4-26 OPERATION GUIDE