Kyocera TASKalfa 181 181/221 Operation Guide Rev-2 - Page 179

System Menu 4 Press the Reset key. The message display returns to the copier basic screen. Machine Administrator Management Code Change You can change the four-digit management code for the security administrator of the other machine. IMPORTANT: If you change the management code, be sure to note it. If you should forget the management code, contact your service representative. The management code at the factory default setting is 1800 for the 18 ppm model and 2200 for the 22 ppm model. Machine Default : Auto Clear Time Silent Mode MachineAdminCode : 90 Sec. : On : 1234 1 Display the Machine Default screen. (See How to Display the Machine Default Screen on page 6-13.) 2 Press U or V to select MachineAdminCode, and 6 then press the Enter key. Machine Admin . Code Change : 1600 # keys 3 Enter the new security administrator management code using the numeric keys, and then press the Enter key. 4 Press the Reset key. The message display returns to the copier basic screen. OPERATION GUIDE 6-27