Kyocera TASKalfa 181 181/221 Operation Guide Rev-2 - Page 166

System Menu Machine Default : End Auto Cassette SW Paper Size(1st) : On : Auto I NOTE: The four-digit management code can be changed. (See Administrator Management Code Change on page 6-24.) 4 If the management code is accepted, the Machine Default screen is displayed. Next, perform the setting referring to the following description of each setting item. NOTE: The * (asterisk) at an item on each setting screen indicates the current setting. Auto Cassette Switching This machine can continue copying by switching the cassette to another cassette that contains paper of the same size and the same orientation as the current paper when paper runs out in the currently selected cassette. To prohibit switching to a cassette that has a different paper type, select On/Only same paper type. NOTE: On the 18 ppm model, this item is displayed only if the optional paper feeder is installed. Machine Default : End Auto Cassette SW Paper Size(1st) : On : Auto I 1 Display the Machine Default screen. (See How to Display the Machine Default Screen on page 6-13.) 2 Press U or V to select Auto Cassette SW, and then press the Enter key. Automatic Cassette Switching : * Off On/All types of paper On/Only same paper type 3 Press U or V to select On/All types of paper, On/Only same paper type, or Off, and then press the Enter key. 4 Press the Reset key. The message display returns to the copier basic screen. Paper Size (cassettes 1 to 4) Set the paper sizes of cassettes 1 to 4. To detect the paper size automatically, set Auto Detection Metric or Auto Detection Inch. Sizes that can be set: 8 1/2 × 13", 8K, 16K 6-14 OPERATION GUIDE